Diagnostic
Utilities
SiSoft
SANDRA 98.7.41 (95/98) TRY IT!
A
comprehensive set of system diagnostic and benchmarking tools designed to allow
you to keep your computer running at peak performance. SANDRA provides
diagnostic, benchmarking, and performance tune-ups for over 64 different
hardware devices and subsystems including CPU, modems, BIOS, drives, graphic
cards, DOS and Windows memory, and many more.
Program
Location:
Programs\sysdiag\sandra\setup.exe
WinTune98
(95/98/NT) TRY IT!
Comprehensive
tune-up and benchmarking software. After you run the tests, you can upload your
results to http://www.winmag.com/wintune98/ to compare with other PC's.
Program
Location:
Programs\sysdiag\wintune98\wt98_vbshell.exe
SysEnhance
II 0.302 (95/98/NT) TRY IT!
A
unique optimization software, dealing directly with hardware. It configures the
PCI chipset and the Processor. Detecting your hardware, it automatically
proposes the best optimization for your system. Almost all recents components
are supported (see the web page for more information)
Program
Location:
Programs\sysdiag\sysenhance\install.exe
FileMon
3.42 (95/98/NT) TRY IT!
Monitor
and display all system information with Filemon. This real-time process viewer
returns detailed information retrieved from the active programs on your
computer. The program name, the request and path to the request, the result,
and other various information is returned almost instantly. You can define a
filter to monitor a specific application or path, conduct searches for
particular activities, and save the results to a file. Very easy to use,
Filemon is particularly valuable for detecting program conflicts and tracing
DLL calls.
Program
Location:
Programs\sysdiag\filemon\Filemon.exe
DLL
Show for Windows 95 3.6 (95/98)
A
small utility that displays a list of all running processes and their DLL
dependencies. Click your mouse on a listed task or process to see the DLLs that
process uses. DLL Show displays comprehensive information about all running
processes including memory load, priority and the DLLs they depend upon. DLL
Show can be configured to optionally place its icon in the taskbar tray.
Program
Location:
Programs\sysdiag\dllshow\Setup.exe
Graphics
Depot Monitor Tests 1.1 (95/98/NT)
This
is a series of 5 screens to test 5 different aspects of your monitors
preformance in 640 x 480 mode. It tests for focus, pincussion, brightness,
contrast and definition. The retail version has tests for resolutions up to
1600 x 1200. Great tool to use when you are shopping for a new monitor.
Program
Location:
Programs\sysdiag\monitor tests\setup.exe
Speicher95
1.3 (95)
It
gives you the possibility to control many important system settings at a
glance. It displays information like CPU usage, free physical memory, data
transfer rate from disk etc. 32 Window95 performance items.
Program
Location:
Programs\sysdiag\speicher95\Speicher.exe
Computer
Consultant 6.50E (95/98/NT) TRY IT!
A
system information tool that gives details about hard drives, memory, video,
sound cards, etc. Consultant also gives accurate realtime benchmarks about your
computer.
Program
Location:
Programs\sysdiag\consultant\consult.exe
D-Log
1.0 (95/98/NT) TRY IT!
Creates
a listing of two directories, by reading from a drive or from a previously
created log file. It then compares the two lists and shows any differences
between them. It inlcudes the capability to copy the directory lists and the
comparison results to the clipboard. Great for tracking changes to your system
directory or comparing between two computers. The size shown is for the full
installation.
Program
Location:
Programs\sysdiag\dlog\Setup.exe
System
Backup 1.0 (95/98/NT) TRY IT!
This
program backs up 6 of your most important system files and saves them into a
directory of your choice. If your system fails, you go to the dos prompt and
type a keyword and the files you have backed up are restored. It is highly
reccomended that you put this program on Windows startup and ONLY backup your
system once on Windows Startup.
Program
Location:
Programs\backup\systembackup\setup.exe
TrackIt
98.0 (95/98) TRY IT!
This
new free software allows you to see all the softwares or processes that are
running on your computer.
Program
Location:
Programs\sysdiag\trackit\trackit.exe
WinSpector
1.2 (95/98)
From
its friendly LCD panel that display the amount of memory and system resources
to its multimedia/screen/ video analyzer, WinSpector is one great program that
will end up in your Start-up box very soon. Besides testing the processor
speed, multimedia capabilities, printing options, and system resources,
WinSpector can also analyze your hard disk right down to the number of clusters
on your harddrive. Everything is analyzed on your system and the information is
given for you, nothing is left out!
Program
Location:
Programs\sysinfo\winspector\setup.exe
Boot
Log Analyser 1.2 (95/98/NT)
Looks
at your Windows95 BOOTLOG.TXT file and calculates the time taken to load each
driver etc, in order to help in locating any cause of lengthy boot-up times.
The displayed result can be sorted by loading duration, filtered to show only
those items with long durations or which reported failure, and saved to a text
file.
Program
Location:
Programs\sysdiag\bootanalyzer\bla.exe
TechFacts
95 (95/98/NT)
Complete
utility for Windows 95. A port of the best features of INFOSPY to the Windows
95 32 bit world. Includes spy functions: processes, heaps... System functions:
CMOS, multimedia, registry, network. Action functions: Screen capture, Process
Kill, Module unload, CMOS save. Tools: Disk Utilization, System Watch (to
capture changes to your system), File Search, Duplicate File Search, DLL
Search, and much more. Has FAX, MAPI and SMTP email embedded so any info can be
transmitted to other parties (ie: Microsoft Tech Support). Help file and Setup
wizard are also embedded. Runs as a single EXE with no other files required.
Valuable tool to help diagnose, solve and report technical problems.
Program
Location:
Programs\sysdiag\techfacts\setup.exe
PACT
ProfileCopy 98 (95/98/NT)
Save
your Windows profile and restore the settings easily on a new installation of
Windows 95/98/NT, on a new computer or notebook, or for a new user account.
Copy settings for the selected wallpaper, screen saver, sound and cursor scheme
including the files themselves, desktop appearance and icon layout, mouse and
keyboard settings, and also the contents of the Start menu, the Desktop and
Favorites folder, and more! You may also backup user defined registry settings
for other applications, and document files and folders.
Program
Location:
Programs\sysdiag\profilecopy\profil98.exe
Yes2K
1.03 (95/98/NT)
Makes
standalone and network PCs Year 2000 compliant. It detects CMOS, BIOS, and RTC
date problems on Windows and DOS PCs. When run from a network or collection
diskette, Yes2K quickly tests workstation Y2K compliance and reports its
results to a central management console. Without requiring a visit to each PC,
administrators can automatically fix non-compliant hardware from the network.
Resellers can add a custom message to Yes2K and distribute a Year 2000 solution
to their customers.
Program
Location:
Programs\sysdiag\y2k\yes2kv10.exe
StartEd
3.50 (95/98/NT) TRY IT!
Allows
you to take a peek at what's currently going on during the boot operations, and
places the power to Edit, Delete and Add to the existing entries at your
fingertips. It even allows you to Backup the Startup Configuration.
Program
Location:
Programs\sysdiag\started\setup.exe
Boot
98 1.0 (95/98/NT)
Follow
up to the popular Boot 95. Now covering Windows NT and MS-DOS and providing
detailed Windows Help 4 system. Boot98 is a well designed utility to edit your
DOS/95/NT boot files. With just a few clicks you can check or uncheck all the
settings (including undocumented ones) influencing the boot process of your
DOS, Windows 95 or NT system.
Program
Location:
Programs\sysdiag\boot98\setup.exe
iC
System Tools 1.0 (95)
The
iC System Tools include the DRTool which corrects the IO.SYS-Bug in Win95B and
the Discoverer. With the last one you can change many of the texts from the
Windows Explorer (e.g. the text on the start button)
Program
Location:
Programs\sysdiag\ictools\setup.exe
FreeMem
Standard 3.0 (95/98/NT) TRY IT!
This
program enables you to gain control over your physical memory. You can allocate
and free any specified amount of memory. This makes Microsoft Windows95 or
Microsoft Windows NT operating systems swap out unused programs and DLLs. The
effect is that you get more free physical RAM which makes working a lot
smoother. You can verify the effects by watching the easy to understand
statistics. A command line interface is available to automate work.
Program
Location:
Programs\sysdiag\freemem\setup
WinChanger
3.0 (95/98/NT)
Makes
changes to the registry much easier. It can remove items from the Add/Remove
Programs List, View icons with Hi colors without the Plus Pack, Add sound
events to a special program, change the owner information, remove the recycle
bin, Speed up the Start button, edit the tip of the day and save them to a reg
file, remove from the run list, set restrictions in Windows 95/NT and much,
much more. WinChanger also support password protection. And all this only by
point and click!
Program
Location:
Programs\sysdiag\winchanger\setup.exe
Cacheman
2.5 (95/98) TRY IT!
When
the system runs out of RAM, Windows starts to use virtual memory instead of
flushing the disk caches. To change this behavior you have to edit the
system.ini file. Cacheman is a GUI based tool used to optimize the cache
settings and change the mentioned INI file. The result is a much better system
performance on most systems, due to the reduced use of the swap file.
Program
Location:
Programs\sysdiag\cacheman\cacheman.exe
FastVid
1.10 (95/98/NT)
A
utility which enables P6 "Write Combining" on Pentium Pro and Pentium
II systems.The result is far better performance in graphics programs such as 3D
games or profssional rendering software. Speedup can be as high as 100 %.
Program
Location:
Programs\cpu\fastvid\Fastvid.exe
How2Boot
1.2 build 14 (95) TRY IT!
Freeware
utility to customise the behaviour of the Windows95 boot process. Over 20
options including some less well known! On-line pop-up help. Requires the VB
5.0 Runtimes.
Program
Location:
Programs\sysdiag\how2boot\setup.exe
Bremze
4.11 (95/98)
Slows
down PC performance by controlling the speed of execution of programs. This
feature can be to decrease the speed of games for 'better results', or when
wishing to gain a better understanding of the sequences and functioning of
programs, etc. Hot-keys for PC speed changing available under Windows.
Program
Location:
Programs\sysdiag\bremze\bremze.com
System
Editor 1.2.3 (95/98/NT) TRY IT!
An
application for editing some information about your computer like register
editor, hard drive information and more!!
Program
Location:
Programs\sysdiag\syseditor\sysedit.exe
Memory
Cleaner 1.04 (95/98/NT) TRY IT!
Clean
memory and launch application.
Program
Location:
Programs\sysdiag\memorycleaner\memclnr.exe
Boot
95 3.2 (95/98) TRY IT!
A
well designed utility to edit your MSDOS.SYS file of Windows 95/98. With just a
few clicks you can check or uncheck all the settings (including the
undocumented ones) influencing the boot procedure of your Windows 95/98 system.
All in just one dialog. Now including a setup routine.
Program
Location:
Programs\sysdiag\boot95\Setup.exe
RegMonEx
2.0 (95/98)
A
registry monitoring tool. It logs every access to you registry. This version
has major improvements for filters.
Program
Location:
Programs\regutils\regmonex\RegMonEx.exe
AllClear2000
Pro 2.0f (95/98/NT)
Check
your PCs for Y2000 compliance quickly and easily. Exhaustive and comprehensive
testing software with detailed, summary and managerial reports.
Program
Location:
Programs\sysdiag\allclear\ac2000x.exe
Extension
Manager 1.0.0.41 (95/98/NT)
This
system management/analyzing tool helps you to take a deep look into the Windows
registry and to assign files with programs the way *you* prefer.
Program
Location:
Programs\sysdiag\extmanager\EMan.exe
DLL
Explorer 2.0 (95/98/NT)
A
32-bit utility program for Windows 95 and Windows NT 4. It is useful in
obtaining lists of the Dynamic Link Library (DLL) files and other module files
which the operating system is currently using.
Program
Location:
Programs\sysdiag\dllexplorer\DLLEx20.exe
Shortcut
Doctor 2.20 (95/98/NT)
Checks
Win 95/NT shortcuts to see which point to targets that can no longer be found.
The program can then resolve invalid shortcuts, edit them, replace all
shortcuts pointing to a certain drive or directory with another (after
validation of new path is made), or delete them to the Recycle Bin. All
shortcuts on a drive can be displayed, regardless of whether they are valid or
not. Supports UNC paths. Has a search & replace function for making bulk
changes in shortcut properties. Internet shortcuts can be checked for errors,
edited, or created. Output report to disk available.
Program
Location:
Programs\sysdiag\shortcutdoc\setupsd.exe
KiLLCMOS32
1.0 (95/98/NT) TRY IT!
WARNING,
EXECUTING THIS PROGRAM FROM THE CD RIGHT NOW WILL RESET YOUR COMPUTER'S CMOS
AND CAUSE YOU TO HAVE TO RECONFIGURE YOUR PC. WHILE NO DAMAGE TO HARDWARE IS
DONE, IT CAN BE INCONVENIENT TO RECONFIGURE YOUR PC, ESPECIALLY IF YOU ARE A
NOVICE. PLEASE USE THIS WITH CAUTION. Basically "resets" your
computer's CMOS settings to the factory defaults. It works with ALL CMOS.
KiLLCMOS32 only changes checksums & values that makes the motherboard CMOS
revert back to factory defaults. Removes forgotten CMOS BIOS passwords as well.
Better than draining that battery!!
Program
Location:
Programs\sysdiag\killcmos\KiLLCMOS32.exe
Puppet's
Uptime Monitor 1.0a (95/98/NT) TRY IT!
This
program keeps track of the following information: Current uptime, Longest
uptime, Number of reboots, Number of crashes, Date of last reboot, Date of last
crash, Days since last reboot, Days since last crash, and CPU usage. Currently,
the CPU usage meter does work under NT.
Program
Location:
Programs\sysinfo\uptime\puptime10a.exe
AMIDiag
AmiDiag
- Diagnostics Program
Program
Location:
Programs\AMIDIAG\AMIDIAG.EXE
BCM
Diagnostics (95)
BCM
Diagnostics is a Win95 based program which helps you diagnose problems of your
PC running Microsoft Windows 95 operation system It includes System Info,
Processor Test, Memory Test, Audio Test Video Test, Modem Test, Graphics Test,
Harddisk Test, Floppy Test CD-ROM Test, and Stress Test. It also has a Resource
Monitor and shortcuts to Microsoft Mouse, Joystick, and ScanDisk. BCMDIAG.EXE
the DOS based diagnostics utility, is also included
Program
Location:
Programs\WINDIAG\INST-DGS.EXE
Diagnosis
95 (95)
Forecast
Diagnostic Software Package Diagnosis 95 Diagnosis has been designed to define
the most probabilistic diagnosis of assumed ones according to the
symptom-complexes of objects For successful work, it is necessary to choose the
control group of objects with the diagnosis, have been defined exactly and
reliably
Program
Location:
Programs\DIAGNOSE\DIAGNOSE.EXE
Fix
It
Fix
It: Utility for diagnosing system problems/conflicts..etc
Program
Location:
Programs\FIDEMO\FIDEMO.EXE
MS
DIAGNOSTIC UTILITY (95)
MICROSOFT
DIAGNOSTIC UTILITY FOR WINDOWS 95
Program
Location:
Programs\MSDZIP\MSD.EXE
Rosenthal
Conflict Resolver (95/NT)
Rosenthal
Conflict Resolver v1 -<ASP Professional diagnostic tool utility from
Rosenthal Engineering corrects IRQ, DMA and I/O conflicts, the major cause of
system crashes, installation and configuration errors etc. Works by analyzing
activity during operation DOS, Windows, Win95, NT, OS/2 *NEW
Program
Location:
Programs\RCFLRS\RCR.EXE
SiSoft
SANDRA 1.10 - Diagonostic Tool (3.1)
SiSoft
SANDRA - The Diagnostic Tool, Ver 1.10 SANDRA is a Windows 95 diagnostic
utility along the lines of Norton/PCTOOLS SI, Q/A Win, etc. However, it goes
beyond them. Shows undocumented system information. Help file explains most of
the terms used. Creates, e mails, faxes or prints system reports From the
writer of SAW, "The System Analyst for Windows", Windows 3.1X system
analyser Shareware. Free for private/educational users
Program
Location:
Programs\SAN110\SETUP.EXE
System
Scanner 98 3.0.05 (95/98/NT)
The
new System Scanner 98 is a small utiltiy that provides vital information about
a computer system making it handy for anyone from the average home user to the
most advanced technician. System Scanner also provides quick access to control
panel settings and shutdown and restart functions.
Program
Location:
Programs\sysinfo\scanner98\ss98.exe
Power
Monitor 1.0 (95/98/NT) TRY IT!
This
application measures your battery usage rate, calculates time remainign even
when windows won't! Also calculates the time until full
charge is reached when charging!
Program
Location:
Programs\sysinfo\power monitor\Setup.exe
WinSystem98
2.1.6 (95/98)
A
small application that displays the % of free memory, the cpu usage, and if
applicable, the temparature in your case if your motherboard has the LM78
chipset. It's cute, small and it's both in English and in French!
Program
Location:
Programs\sysinfo\system98\WinSystem.exe
Stats
1.3.0 (95/98/NT) TRY IT!
Stats
does just what it's name suggests - gives you all the stats you need for your
Windows 95/98/NT machine. Stats gives you all the information you need on your:
Physical Memory, Swap File, Disk Cache, Drive Access, CPU usage, and Drive
usage. It's a complete package!
Program
Location:
Programs\sysinfo\stats\Setup.exe
KK
System Info 1.0b (95/98/NT) TRY IT!
View
detailed information of the running system. Requires the VB 5.0 Runtimes.
Program
Location:
Programs\sysinfo\kk\Setup.exe
VBSys
Windows System Monitor 4.20 (95/98)
Designed
to help a user monitor many system resources at all times and to combine some
utilities that you may already use.
Program
Location:
Programs\sysinfo\vbsys\vbsys420.exe
Battery
Status 1.0 (95/98/NT) TRY IT!
Does
your PC have a battery or if you're not sure if it does, I would download
Battery Status right now. Not only does Battery Status tell you IF you have a
battery in your computer, it altso tells you all the information you may need
about your battery. Battery Status will tell you if you have a battery at all. How
long time there is left before you need to recharge your battery, how long your
battery can last when you have recharged it to max power, and a lot of other
useful information. Be prepared and get the chance to save your work before the
battery is flat and the screen is black, download Battery Status right now!
Program
Location:
Programs\sysinfo\battery stat\BatteryStat10.exe
Puppet's
Uptime Monitor 1.0a (95/98/NT) TRY IT!
This
program keeps track of the following information: Current uptime, Longest uptime,
Number of reboots, Number of crashes, Date of last reboot, Date of last crash,
Days since last reboot, Days since last crash, and CPU usage. Currently, the
CPU usage meter does work under NT.
Program
Location:
Programs\sysinfo\uptime\puptime10a.exe
StatBar
Console 1.1.3.39 (95/98/NT)
Monitors
free system resources, CPU, pagefile and free disk space on up to two hard
drives. Works with drives greater than 2Gb. Can send output to a file if
desired. Utility works from a console window, but is a true 32-bit Win32
application. Unzip to any directory and your ready to go!
Program
Location:
Programs\sysinfo\statbar\StatBarC.exe
HardDisk
Space Monitor 98 1.98 (95/98/NT) TRY
IT!
Features:
Monitors your harddisk space, System Tray Application, Auto refresh, Auto
warning, User-defined refresh setting, HDD Unit Setting (Bytes, KB, MB, GB),
Display HardDisk Information (Label, File System, HDD type),HDD Tools, Cool
User Interface. Requires the MFC DLLs.
Program
Location:
Programs\sysinfo\hdmon\HardDisk98.exe
DLL
Show for Windows 95 3.6 (95/98)
A
small utility that displays a list of all running processes and their DLL
dependencies. Click your mouse on a listed task or process to see the DLLs that
process uses. DLL Show displays comprehensive information about all running
processes including memory load, priority and the DLLs they depend upon. DLL
Show can be configured to optionally place its icon in the taskbar tray.
Program
Location:
Programs\sysdiag\dllshow\Setup.exe
Power
Center 1.0 (95/98/NT)
Tired
of those battery management programs that only tell you the percentage of the
battery? Power Center is a useful program to help you manage your laptop
computer battery. Most of the similar programs only display the percentage of
the power left in the battery. One of the best parts of the Power Center is the
it can estimate the amount of time the battery can hold up by learning by
itself. It recalibrate its estimation each time the battery lever drops and
keeps a record on it. Therefore, the estimation gets more and more accurate
everytime. Power Center provides every single bit of information you need
regarding your battery. With the help of the Control Center, you can set the
Power Center to inform you whenever the battery is lower than a specific
percentage, at a specific percentage, when the AC power goes on, or when the AC
power goes off. You can set it to be always on top of every other programs or
to hide all the buttons to conserve previous screen space.
Program
Location:
Programs\sysinfo\powercenter\Setup.exe
DiskDiver32
1.0.2 (95/98/NT) TRY IT!
Use
DiskDiver32 to inventory your PC for specified file types and return
user-defined information about those files such as: File Version, Comments,
etc. Also returns system BIOS info, OS version. This program was originally
created by an IS department to prepare for "The Year 2000."
Program
Location:
Programs\sysinfo\diskdiver\dd32setup.exe
Uptime
1.03 (95/NT) TRY IT!
Will
display the time that your system has been up in a tiny window. It can be
minimized to the system tray, or to the taskbar. Requires the VB 5.0 Runtimes.
Program
Location:
Programs\sysinfo\uptime2\Setup.EXE
Cool
Timer 98 1.07 (95/98/NT) TRY IT!
Displays
how long a system has been running in the system tray. Broken down into Days,
Hours and Minutes. This is a perfect utility for servers that need to know how
long they have been up. Cool Timer takes almost no system resources to run, so
there is no reason not to run it.
Program
Location:
Programs\sysinfo\cooltimer\cooltmr.exe
OEM
Information Editor 3.0 (95/98) TRY IT!
A
Info about your computer, if you already have pevious OEM Information, you
could see this by clicking SYSTEM icon through Control Panel or WIN+Break/Pause
key. This software will create or edit your OEM Information. Requires the VB
4.0 Runtimes.
Program
Location:
Programs\sysinfo\oeminfo\OEM Info 3.0.exe
What!
Laptop Batt & Sys Monitor 2.0 (95/98) TRY IT!
Displays
the amount of battery life in minutes and as a percentage. Also displayed is
the current time and battery images showing the charge level and a power plug
if the battery is being charged. Visual clues are provided if the battery is
low. Resides on the System tray with options available via right-mouse click.
Options include: Clock Chiming, Laptop Suspend and Shutdown, automatic
Wallpaper Changer, User defined programs and CPU Usage display. Full access to
all Performance Values to monitor as well as CPU e.g. Modem speed, disk usage,
network speed, memory usage and swapfile status.
Program
Location:
Programs\sysinfo\what\Whatd.exe
Small
Functions 3.03 (95/98) TRY IT!
Gives
you the ability to do thousands of tasks in a small shell. Tasks such as
monitoring drive space and swap file space to viewing clipart from Microsoft
Office, to just saving your screen with the screen saver! Funky screen saver
that is just like the setup screen but in multicolors. The screen saver really
gives you a readout on CPU USAGE with colors. More colors means less CPU usage.
A few colors and slow speed means heacy CPU load. Enjoy! Requires the VB 4.0
Runtimes.
Program
Location:
Programs\sysinfo\smallfunc\setup.exe
K/oS
COMix 1.1 (95/98/NT) TRY IT!
An
easy-to-use and powerful viewer for COM (also known as OLE) objects on a
computer. Normally, you don't have a chance to see the COM objects because they
are all hidden deep inside the registry. K/oS COMix will not only show you all
the objects; it also divides them into different categories so you can easily
find what you are searching for. Beside this, you can also use K/oS COMix to
search for specified information.
Program
Location:
Programs\sysinfo\kos
DeviceInfo
2.0 (95/98) TRY IT!
A
small utility that displays information about the screen and printer
device-contexts used by Windows. Thus DeviceInfo can be a big help programming
graphic-applications and resolving problems with display and printer-drivers.
Program
Location:
Programs\sysinfo\deviceinfo\DevInfo.exe
Uptime
Snooper 1.05 (95/98/NT) TRY IT!
This
small program sits quietly in the taskbar icon tray and keeps track of how much
time does your Win95/NT computer stay up at a time; it will show the current
uptime and the up-to-date average. For notebook computers UpSnoop will deduct
the time the computer was in suspend state (i.e. off but not rebooted). Useful
for system administrators and those who just like to know such things.
Program
Location:
Programs\sysinfo\uptimesnooper\Upsnoop.exe
ClassList
Version 1.0 Alpha 1 (95/98/NT) TRY IT!
Lets
you look behind your running applications and the Windows Desktop. - In this
alpha demo version, it shows you the window classes of all running applications
and MS-Windows and enables you to kill (shut down) multiple of these classes
(tasks) either with 'force' (applications do not save their data and are forced
to close) or normally at once. This is an unready version of this software and
it shall be only a demonstration of coming features - so feel free to use and
spread this program as you like.
Program
Location:
Programs\sysinfo\classlist\ClassList.exe
WinSpector
1.2 (95/98)
From
its friendly LCD panel that display the amount of memory and system resources
to its multimedia/screen/ video analyzer, WinSpector is one great program that
will end up in your Start-up box very soon. Besides testing the processor
speed, multimedia capabilities, printing options, and system resources,
WinSpector can also analyze your hard disk right down to the number of clusters
on your harddrive. Everything is analyzed on your system and the information is
given for you, nothing is left out!
Program
Location:
Programs\sysinfo\winspector\Setup.exe
Cool
Info 1.0 (95/98/NT) TRY IT!
Displays
just about everything about your computer you could possibly want to know in a
graphical interface. Nothing is left unknown about drives, files, RAM, mobile
systems, CPU's, etc.
Program
Location:
Programs\sysinfo\coolinfo\colinfo.exe
StatBar
97 2.2.32 (95/98/NT) TRY IT!
A
handy utility with these great features: Monitor system resources, CPU load,
free disk space, launch applications or folders, shutdown or reboot your PC,
dock to the taskbar tray, display information on local and mapped network
disks, audible/visual low disk space warnings.
Program
Location:
Programs\sysinfo\statbar97\Setup.exe
Windows
95 Log System 2.2(95/98/NT) TRY IT!
A
tiny app that logs Windows95 startup and shutdown.
Program
Location:
Programs\sysinfo\logsystem\WinLog.exe
powerPANEL97
5.1 (95/98/NT)
A
powerful 32-bit utility, powerPANEL97 is designed to help you accomplish your
common tasks in Windows 95 in a faster, more efficient manner. Aside from the
basic feature of showing date and time on a panel, powerPANEL97 also has the
following features: a fully customizable clock panel, a powerful program
launcher that can be configured to launch any Windows applications, one-click
access to Windows Explorer, Control Panel, the MS-DOS prompt, and common
Windows 95 accessories like WordPad and Paint. The utility also has the ability
to show free disk space on the clock panel and to constantly monitor disk space
and issue a warning when space is low.
Program
Location:
Programs\sysinfo\powerpanel\setup.exe
System
Space 2.0 (95/98/NT)
Application
and document launcher that resides in the system tray until needed by the user.
Right or left-clicking on the tray icon causes a menu to display. Eight menus
are available by using keyboard modifiers in combination with the mouse
buttons. Main dialog has been completely redesigned and now includes a tree
control, drag and drop, cut and paste, and right mouse button support. Eight
menus are available (versus two for Version 1.X) and any item can be made to be
either launched or edited.
Program
Location:
Programs\sysinfo\sysspace\setup.exe
MoniDIR
1.1 (95/98/NT) TRY IT!
A
Freeware folder/file utility for Windows 95. It watches up to 5 different
directories looking for new, changed or delete files. As soon as a change
happens an alarm will sound with a list of the affected files. Fits into the
system tray. User can adjust the time interval and the alarm file. Good for
network users.
Program
Location:
Programs\sysinfo\monidir\Setup.exe
TechFacts
95 (95/98/NT)
Complete
utility for Windows 95. A port of the best features of INFOSPY to the Windows
95 32 bit world. Includes spy functions: processes, heaps... System functions:
CMOS, multimedia, registry, network. Action functions: Screen capture, Process
Kill, Module unload, CMOS save. Tools: Disk Utilization, System Watch (to
capture changes to your system), File Search, Duplicate File Search, DLL
Search, and much more. Has FAX, MAPI and SMTP email embedded so any info can be
transmitted to other parties (ie: Microsoft Tech Support). Help file and Setup
wizard are also embedded. Runs as a single EXE with no other files required.
Valuable tool to help diagnose, solve and report technical problems.
Program
Location:
Programs\sysdiag\techfacts\Setup.exe
PC-CONFIG
8.45
PC-CONFIG
V8.45 -Detects all the hardware in your PC and shows them on the screen One of
the best sysinfo-programs ever With CD-ROM benchmark routine! Finds PCI boards,
6x86, K5, K6, NexGen, UMC and PentiumPro CPUs, detects lots of VGA chips, APM
functions, Burst Cache, Green boards, Pentium Bug, PCMCIA, EIDE feat detailed
PCI and SCSI info
Program
Location:
Programs\CONF845E\INSTALL.EXE
agSI
1.2.2
agSI
1.2.2 English version of the SystemInfo tool agSI with hundreds of items of info
about hardware/system, operating system, memory, software, drives, and
configuration files, (running in DOS text mode) with many additional functions,
such as changing system settings and disk formatting Extensive, detailed online
help New: extensive Intel chipset info better hard disk bench, several bugfixes
Program
Location:
Programs\AGSI\AGSI.EXE
CTS
IOInfo v1.1
CTS
IOInfo v1.1 identifies which I/O addresses are used in the computer. Use IOInfo
before installing a new sound card modem or other device to make sure that the
address selected is available. IOInfo runs in DOS and should also be run in
each operating system used by the computer (Windows, Windows 95, Windows NT and
OS/2). The registered version saves all report information to disk combines the
reports into a single report
Program
Location:
Programs\IOINFO\IOINFO.EXE
DOSINFO
v1.3
DOSINFO
v1.3 Information about dos version, current date and time, graphic drive, BREAK
and VERIFY settings, environment variables free conventional memory, hard disk
sizes and free space New in v1.3: Output redirectable to file FREEWARE by
Balint Toth
Program
Location:
Programs\DOSINF13\DOSINFO.EXE
DR.HARDWARE
SYSINFO V 3.7e
DR.HARDWARE
SYSINFO V 3.7e Incredible hardware detection and benchmarking program. 60 windows
with details about CPU, chipset BIOS, PCI, SCSI and EIDE devices about VGA
adapter, CD ROM, network memory, WIN 95. With benchmarks report function and
memory dump New in 3.7e: Pentium-II detection Intel 430TX chipset details and
SCSI benchmark (both in reg. ver sion); detects Ultra-DMA/33-Mode on EIDE
drives
Program
Location:
Programs\DRH37E\DRHARD.EXE
Hardware
Info Program
Hardware
Info Program <SHAREWARE Recognizes 100 CPUs, CPU info, FPU MultiProcessor
System info PnP, DMI, APM and ACPI information Chipset, memory, cache size+type
id ISA, EISA, MCA, PCI devices info 306 VGA chipsets, memory size+type Video
card, RAMDAC, TIGA, TV tuner VESA DDC monitor identification Sound card, CD-ROM
(speed), PCMCIA COM/LPT & modem info; 8042 id ASPI SCSI devices information
ATAPI, IDE, E-IDE and LS-120 info CPU Errata Test
Program
Location:
Programs\HWINF424\HWINFO.EXE
InfoPro
1.6
InfoPro
1.6
Program
Location:
Programs\INFOPRO\SETUP.EXE
InfoSys
InfoSys
v1.0 is a shareware that displays system information on Windows 95 NT, and
Win32s platform. The shareware can be distributed freely at no cost provided it
is not charged in any way. No installation is required
Program
Location:
Programs\INFOSYS\INFOSYS.EXE
NBench
2.4 for Windows NT and Windows 95
NBench
2.4 for Windows NT and Windows 95 NBench reports the following components of
performance CPU speed: integer and floating operations/sec L1 and L2 cache
speeds: MB/sec main memory speed: MB/sec disk read and write speeds: MB/sec SMP
systems and multithreaded OS efficiency can be tested using up to 20 separate
threads of execution
Program
Location:
Programs\NBENCH\NBENCH.EXE
Neko
System Information Utility Ver 3.3
Neko
System Information Utility Ver 3.3 Welcome to Neko System Information utility
ver 3.3 [Nsi]. Nsi will provide the user with all the system information that
he/she needs to know. Nsi can be very handy when it comes to hardware trouble
shooting
Program
Location:
Programs\NSI33\NSI.EXE
SYSTEM
INFORMATION TRACKER
SYSTEM
INFORMATION TRACKER The System Information Tracker Reports the following things
on your PC MyComputer (Name Given to MyComputer Current Operating System
Windows Version Disk Drive Space Available and Used Free Memory Free Memory
Available Physical Memory Distribute this software freely, check us on the web
at http://www.geocities.com/Hollywood/5302 e:mail: innrgrv@ix.netcom.com This
freeware never expires and no nag screens
Program
Location:
Programs\SYSINFOW\SETUP.EXE
System
Information v1.4 for Windows 95
System
Information v1.4 for Windows 95 Product Description System Information 1.4 for
Windows 95 displays information about your computer hardware in an
easy-to-understand format. This includes CPU
Program
Location:
Programs\SYS14D1\SETUP.EXE
SYStem_CAPture
Utility Package
SYStem_CAPture
Utility Package This utility package is designed for technicians, systems
managers programmers or others who do setup, confiquration, maintainance, and
diagnostic type tasks on PC`s, especially in the field or remotely Utilities
included in this package allow a great deal of system information for a PC to
be captured quickly to disk files. The captured `image` can then be examined,
using other utilities in this package, at a time and place that is most
convenient.
Program
Location:
Programs\SYSCAP\CMOS.EXE
SystemConfig
Little
Blue Frog Software`s SystemConfig 1.0 Final Beta
Program
Location:
Programs\SYCFG1B5\SYSCONFG.EXE
InfoSpy
v2.61
InfoSpy
v2.61 (4/08/97 Get the latest version, new programs and support on our homepage
http://ourworld.compuserve.com/homepages/deansoft) InfoSpy is a general purpose
Windows environment viewer allowing you view Heap, Tasks, Windows, Classes,
Modules, File Handles, DOS and Memory Information. You can trace messages,
stack and set up automatic timers to provide real-time tracing on virtually
every aspect of Windows The new System Sentry library lets you monitor Windows
program usage, control what Windows programs can be executed, disallow users
from running programs disable the CTRL-ALT-DEL keys under Windows, and disable
entire directories InfoSpy has been updated to run under Windows 95. Still a 16
app but ALL functions work and provide accurate information for the Win95
environment InfoSpy has full task scheduling capability allowing you to
schedule the execution of programs, Windows shutdown, Windows Restart, System
Warmboot Coldboot and the termination of any task The Screen Capture Utility
allows you to capture the entire desktop, a specific window or cut a portion of
the screen to the clipboard. You can save the captured image as a bitmap too
The DLL search utility will examine any local or network drive for all programs
that reference DLLs in order to provide a list of unreferenced DLLs. In
addition, all duplicate DLLs are displayed with an option to delete the
duplicates The ICON search will examine any file, directory or drive for files
containing ICONS and will list them (and draw them) in a convenient list You
can copy any of the listed ICONS to the ClipBoard Ver 1.xx was highly praised
by shareware magazines and software reviews and was published in several books
including "Byte Magazine`s Programmer Cookbook for Windows" and
WUGNET`s "Windows Configuration Secrets" as a powerful,easy tool to
inspect your Windows environment InfoSpy now includes STRESS functions that let
you use InfoSpy to really put the pressure on Windows and other applications.
You can grab Global Heap, GDI Heap, User Heap, File Handles, Disk Space and
Timers. There is also a function that continually does disk I/O to help
simulate a busy disk Real time tracing of stack, windows messages and serial
comm ports has been added as well as IntelliLib (tm) technology that lets you
customize InfoSpy by specifying with DLLs to load to add\remove functionality
Program
Location:
Programs\ISPY261\SETUP.EXE
Speed'Ocd
1.2 (95/98/NT) TRY IT!
Is
your cdrom drive REALLY working at the speed that is written on its box? You
are now enabled to check it out! Speed'ocd is a utility that estimates your
cdrom drive speed.
Program
Location:
Programs\hd\speedcd
CliBench
MK II 1.0.0 (95/98/NT)
A
nice program for benchmarking your CPU and Harddisk.
Program
Location:
Programs\benchmark\clibench\CliBench.exe
WinTune98
(95/98/NT) TRY IT!
Comprehensive
tune-up and benchmarking software. After you run the tests, you can upload your
results to http://www.winmag.com/wintune98/ to compare with other PC's.
Program
Location:
Programs\sysdiag\wintune98\wt98_vbshell.exe
BYTE
Benchmarks
This
is release 2 of BYTE Magazine`s BYTEmark benchmark program previously known as
BYTE`s Native Mode Benchmarks). This document covers the Native Mode (a.k.a.
Algorithm Level) tests; benchmarks designed to expose the capabilities of a
system`s CPU, FPU, and memory system.
Program
Location:
Programs\BM2WIN16\BYTECPU.EXE
NBench
2.4 for Windows NT and Windows 95
NBench
2.4 for Windows NT and Windows 95 NBench reports the following components of
performance CPU speed: integer and floating operations/sec L1 and L2 cache
speeds: MB/sec main memory speed: MB/sec disk read and write speeds: MB/sec SMP
systems and multithreaded OS efficiency can be tested using up to 20 separate
threads of execution
Program
Location:
Programs\NBENCH\NBENCH.EXE
Wintune
97
Wintune
97 has a new, faster user interface that allows the program to load much faster
than the earlier Wintune 95. Wintune 97 now tests the latest Pentium II
systems. UPDATE! Wintune 97 tests video systems on the fastest new computers at
full-screen resolution. Wintune 97 will download faster than our earlier
program, due to its smaller size.
Program
Location:
Programs\WINTUN97\SETUP.EXE
CLiBench
CliBench
is a Win32 application designed for measuring your system`s performance. You
can test raw CPU power, the computers memory interface and the harddisks
transfer speed. It supports Windows NT 4.0 as well as Windows 95
Program
Location:
Programs\CLIBEN\CLIBENCH.EXE
Mr
Mirror 1.2 (95/98/NT) TRY IT!
Creates
mirror images of a selection of directories to a zip/jaz drive, a mapped
network drive or even a local hard disk. It keeps track of when and that it
does. It stores all its information on the volume that holds your mirror image.
Mr Mirror skips files that are already up to date. Mr Mirror features batch
mode and partial updates. Mr Mirror is 'Mailware', it is a full version, no
restrictions.
Program
Location:
Programs\backup\mirror\setup.exe
BackupXpress
0.99.031 (95/98/NT)
Backup-Software:
perfect for local backups or compressed archives. File backup compressed backup
in zip-file. Complex include and exclude filter. Perform backup at system
shutdown. Backup automation for removable mediums (ZIP-Drive) and lots of more
features.
Program
Location:
Programs\backup\backupx\BackupX.exe
InterBack
1.30 (95/98/NT)
Use
InterBack to backup selected directories or specific files. You can backup your
data while you browse the WWW, while you read your e-mail, or even when you are
soundly sleeping! Once InterBack is setup, you can stop worrying about your
data and spend time doing other things.
Program
Location:
Programs\backup\interback\interback-e.exe
LFN
Backup & Restore 1.2 (95/98/NT) TRY IT!
Restore
long file names from LFN backup. Requires the VB 5.0 Runtimes.
Program
Location:
Programs\backup\lfn\setup.exe
PACT
2ndBackup 98 98.7 (95/98/NT)
Creates
second copies of your current documents while you are working on them. It
automatically stores changed versions in an archive folder, one per minute or
the last 60 minutes, one version every hour during one day, one version for
very day in the last month, and one version per month forever. This is like an
airbag for your data!
Program
Location:
Programs\backup\pact\backup98.exe
EZBackup
2.0 (95/98/NT) TRY IT!
An
application designed to be easy to use. It compresses the backed up files into
a Zip archive. The Zip archive will then be restored in the exact place that
the file were backed up from. EZ Backup also supports multiple backups and
restore simultaneously so you can be backing up a set of files while at the
same time restoring another set. This proves useful if you have to make several
backups while restoring another set of files in a very limited time.
Program
Location:
Programs\backup\ezbackup\setup.exe
Configuration
LifeGuard 2.0 (95/98/NT) TRY IT!
This
superb configuration backup program for Windows 95 gets yet more seasoned! Easy
to operate, extremely quick, highly effective, safe and reliable - simple by
its interface and operation, yet powerful by its background performance. Scope
of users - from beginners to gurus, everyone will benefit! Version 1.2 has been
tested in Windows 98 (beta 3) and further optimized for full compatibility with
its environment. Fully functional SW with all features enabled allowing the
users to duly evaluate its power. Simply a must - not to be missed! You will
not need any other configuration backup program anymore.
Program
Location:
Programs\backup\life\Clg20.exe
System
Backup 1.0 (95/98/NT) TRY IT!
This
program backs up 6 of your most important system files and saves them into a
directory of your choice. If your system fails, you go to the dos prompt and
type a keyword and the files you have backed up are restored. It is highly
reccomended that you put this program on Windows startup and ONLY backup your
system once on Windows Startup.
Program
Location:
Programs\backup\systembackup\setup.exe
Transfer
95/PE 2.09.23 (95/98)
Can
be used to either copy your hard drive to a new hard drive or as a backup.
Re-installation of Windows may take a day or longer, Transfer PE performs this
task in minutes. The source and target drives can be of different sizes
"Larger or Smaller", any cluster size. FAT16 to FAT32 conversions
without fear of data loss. Supports: IDE, EIDE, SCSI, JAZ, ZIP, SysQuest, and
more. Transfer PE is part of the Transfer series of programs.
Program
Location:
Programs\backup\transfer\transx95.exe
ZipCopy
1.3 (95/98/NT)
A
utility for synchronizing 2 disk drives, particularly between a hard disk and a
removeable drive such as the IOMega Zip disk. It supports automatic setup of
projects, include/exclude masking of files and directories and sortable file
listing.
Program
Location:
Programs\backup\zipcopy\setup.exe
Rescue
2.0 (95/98) TRY IT!
This
is a recovery program that is extremely powerful! It is fully functional and
easy to use. It will backup and restore the following files: Autoexec.bat,
Config.sys, Command.com, IO.sys, MSDOS.sys, Protocol.ini, System.da0,
System.dat, System.ini, User.da0, User.dat, Win.ini,should a corruption happen. It also has an
install and uninstall program with instructions.
Program
Location:
Programs\backup\rescue\setup.exe
BackupLatest
3.0 (95/98) TRY IT!
Scans
a user selected directory (with its subdirectories) and backs-up those files
that were modified most recently. Excellent for backing up your ever-changing
critical systems files, or newly created documents. This new version supports
all local drives and mapped network drives, and is able to back up based on the
files' extensions.
Program
Location:
Programs\backup\latest\setup.exe
CyberSoft
File Backup 1.0 (95/98) TRY IT!
This
program is worth it's weight in gold. It's a tiny program that allows you to
back up important startup files on your computer. These files include your
AUTOEXEC.BAT, CONFIG.SYS, etc. It also lets you restore any of the backed up
files in the case of a crash. Beleive me, this little program can save you time
and money!
Program
Location:
Programs\backup\cyber\install.bat
ImageCast
LE 1.0 (95) TRY IT!
The
first multicasting freeware drive imaging product for fast cloning of standalone and networked PCs.
Program
Location:
Programs\backup\image\LEclient.exe
FileBack
PC 3.1A (95/98/NT)
High
speed file backup and synchronization utility which sits in your system tray.
FileBack PC allows you to specify which files are backed up, where, and when.
Includes support for automatic backup of changed files (via notification from
OS), removable media, automatic network connection restoration, file
restoration wizard, and backup directory cleanup wizard.
Program
Location:
Programs\backup\fileback\setup.exe
Registry
Backup Util 1.1 (95/98/NT) TRY IT!
One
of the most easy programs to use, for backing up your registry and Windows
profiles.
Program
Location:
Programs\backup\regback
REG-ulate
1.1 (95/98) TRY IT!
A
set of registry functions for Windows 95/98, which will backup and restore the
vital system files to hard disk or floppy. Functions are also provided to save
and restore LFN's, as well as condensing the registry to a more compact size.
Works with any version and FAT32.
Program
Location:
Programs\backup\regulate\setup.exe
Registry
Backup 98 2.0 (95/98/NT) TRY IT!
For
those of you that don't want to worry about backing up your registry, this is
the program for you. Registry Backup 98 will make a total of 10 backups.
Backups are numbered by the last digit of the day. It takes about 6-10 seconds
each time it's run to backup your registry. Just put it in your startup folder,
specify a directory and your set!
Program
Location:
Programs\backup\reg98\setup.exe
Backup
Forever 1.0 (95)
Makes
backup copies and restores with high security at the cost of speed and disk
space. When this program makes a backup, it records so many redundant
information as possible to recover all information recorded on the backup even
a fail destructs some file region.
Program
Location:
Programs\backup\forever\forever.exe
The
File Splitter 1.0 (95)
Splits
up large files on to multiple floppy disks, so that you can back up files that
are bigger than 1.44MB, or you can transer large files to other computers. The
program then recombines the floppy disks into a file on the hard drive.
Program
Location:
Programs\backup\splitter\setup.exe
LifeSaver
3.42 (95/98)
A
Windows 95 configuration file backup and restore utility which can be used to
recover from problems due to corrupt configuration files or changes to configuration
files which can not be undone. The Standard features provide a fully functional
copy of LifeSaver which never expires and is free. There is a 30-day trial
period for Additional features, which require registering to use after 30 days.
Program
Location:
Programs\backup\lifesaver\lifesavr.exe
DiskSpan2
2.0 (95/98) TRY IT!
A
simple utility that adds a choice to your SendTo menu allowing you to
automatically compress, copy, and span file(s) across multiple disks with ease.
It uses regular inhouse zip compression. When you open the SpAn file, DiskSpan
resotres your files quickly. Great for sharing or storing large files.
Program
Location:
Programs\backup\diskspan\setup.exe
QuickZip
Backup 2.1 (95) TRY IT!
Replicates
an entire directory structure, then compresses all files in each directory
using standard ZIP compression. It is ideal for backing up to Zip disks.
Program
Location:
Programs\backup\quickzip\qzbsetup.exe
Mehul's
Backup (95/98/NT) TRY IT!
Backup/Synchronize
file(s) and/or directories (optionally specify recursively). You can specify
which file extensions and/or directories NOT to backup/sync. Backup manually or
setup automated backups which lets you specify how often to run backups.
Convenient access to the program via the system tray where an icon indicates
the status of the program.
Program
Location:
Programs\backup\mehul\setup.exe
GRBack
2.0 (95/98/NT)
A
full functional Shareware Windows NT/95/98 backup program that can help you
maintain your vital computer data. It recreate your source directory tree into
the destination drive and for every directory it create a PKZIP 2.0 compatible
archive with long file name support. You can do a full, incremental or
differential backup of your data. You can schedule your backup with the aid of
the Microsoft System Agent (SAGE) under Windows 95 or using the Microsoft AT
utility under Windows NT. Fully configurable with simple text files. The
program comes with a setup program that allows you to install, evaluate and
unistall the package leaving your system clean.
Program
Location:
Programs\backup\grback\setup.exe
Safety
Net Pro 6.4 (95/98/NT)
A
highly acclaimed utility for backing up key files by file extension. It has one
default setting - to backup key Windows & system files including INI files,
Registry Files, and Startup Files - and 5 user configurable options. Safety Net
Pro could easily backup all of the document and/or database files on your
drive, for example, and it can Zip them to disk with the directory structure
intact! Safety Net Pro features the ability to create PKZIP v2.04 compatible,
32 bit Zip files, and will span multiple disks, if required. This program is
also capable of printing your directory tree. If you have ever been faced with
rebuilding a hard drive from scratch, you know how valuable this hard copy can
be! Safety Net Pro can also make a boot disk, unzip your backups, and print
file lists as requested. Requires the VB 4.0 Runtimes.
Program
Location:
Programs\backup\safety\install.exe
nnCOPY
File Exchange Util for Teams (95/98/NT)
Copy
tool for software development teams. Define projects and team members. Assign
ownership to files under Windows! Synchronize directories on local and shared
drives. Exchange files between team members depending on timestamp and file
ownership. Show copy history. No more problems like, "oops, I edited
Mark's file". Shareware program with an easy point and click operation.
Program
Location:
Programs\backup\nncopy\setup.exe
Stratesave
1.1b (95/98/NT)
Network
backup program, backing up your PC to your Unix or OpenVMS server.
Program
Location:
Programs\backup\stratesave\sts32.exe
Backup
and Restore 1.01 (95/98)
Backs
up the vital files of Windows '95 registry and the DOS configuration files. It
can then be used to restore these files using the 'F8' menu in Windows '95 at
Startup to go into DOS mode, run the program and restore the original files
that were backed up earlier by yourself in Windows.
Program
Location:
Programs\backup\back and restore\dsbr.exe
Island
CodeWorks Internet Backup 1.0 (95/98/NT)
Tapeless
backup program for Windows NT and Windows 95 that instead of using diskettes,
tapes or portable drives to back up your computer, it uses existing disk space
on any FTP server. ICW Backup supports long file names, encryption and data
compression and sports a Windows explorer-like interface. Perfect for
companies, Universities and Government agencies wanting to set up an
institution-wide backup strategy for desktop computers.
Program
Location:
Programs\backup\island\icwibu.exe
SafeKeeper
Backup 1.1 (95/98/NT)
the
easiest way to quickly and easily backup all your critical files. Protect your
files from accidental deletion by backing them up to a safe location on your
hard drive, removable drive, or network drive. SafeKeeper lets you quickly
select any files or entire directories for backup. Organized by groups
(finance, work, e-mail, etc) that you create, all your critical files are
stored in compact, industry-standard .ZIP files for clean, organized storage.
All critical system and registry files can also be backed up automatically for
use in case of a system crash. There is no easier way to backup your work under
Win95 - you need it to protect your 100's of hours of work stored on your hard
drive.
Program
Location:
Programs\backup\safekeep\setup.exe
SysBack
1.10 (95/98/NT)
A
daily backup of the Windows registry and system files. In an emergency (disk
error, failed installation of software or even user error), these backups can
get Windows quickly (less than 5 mins!) on the road again without the need for re-installing
windows.
Program
Location:
Programs\backup\sysback\SysBack.exe
mini-Backup
Master 3.0 (95/98/NT)
Initially
created to answer the problem of LAN users NOT backing up their database files.
The mini-Backup Master resided on a computer on the LAN with READ rights to All
of the Directories where the Files needing to be Backed up were kept. The
computer would be left on and once a day the mini-Backup Master would backup
all of the Selected Files and Directory Masks. A Full Week of backups was Kept On
Hand. Therefore, a user could restore from a backup from any point in the last
week. In v2.0 for Windows 95/NT, the mini-Backup Master has become a backup
dynamo. Fully Compressed Backups or Straight Backup Copies of Files and
Directory Masks are housed in Seven Sub-directories, Sunday through Saturday.
Depending on the Day of Backup, the Backup files are stored in these
sub-directories. Compressed Backups are stored in the Familiar ZIP Format.
Restores from any one of the Seven Archives is a Click Away. The mini-Backup
Master does not have to reside on an Administrator's Machine, any user that
wants to backup his/her files can benefit from this application. Moreover, the
mini-Backup Master does not have to run continuously, backups can be run on the
Selected Files and Directory Masks at the Click of a Button. In addtion, the
Application will retrieve the Network Sign On Name of the Currently Signed On
Individual, and it has the Ability to Map(Connect) and Disconnect Network Drive
Letters.
Program
Location:
Programs\backup\miniback\setup.exe
95
System Backup (95/98/NT)
95
System Backup
Program
Location:
Programs\95BACKUP\SETUP.EXE
AC`s
Backup for Win95 (95)
This
is the Shareware Version of AC`s Backup for Win95
Program
Location:
Programs\ACBACK92\SETUP.EXE
CleanSweep
Deluxe Trial Version
CleanSweep
Deluxe Trial Version
Program
Location:
Programs\CLNSWPDX\CSDTRIAL.EXE
Config
LifeGuard for Windows 95 (95)
The
purpose of the program: configuration and main system files backup &
restore utility for Windows 95, by Visual Fantasy
Program
Location:
Programs\CLG95T\CLG95T.EXE
File
Wizard
Backup
Utility aloowing backups of selected files without repeating setup. Also it is
a Compression, Expansion, and Extraction Utility
Program
Location:
Programs\FILEWD10\SETUP.EXE
WINIMAGE-2.50
(95)
WINIMAGE-2.50<ASP>THE
WINDOWS DMF DISK IMAGER FIXES SOMES DMF problem under w95, win95 look Open
CDROM ISO image file in read only This .ZIP:Win16 (Win 3.1) & Win32
(WinNT-x86 Win95,32s),5 langages. New:ListView,tabb. dlg boxes for option. CAN
READ/WRITE/FORMAT DMF under WinNT 3.5,!WIN95!, Win3.1. support LFN Contain both
Win 3.1 and WinNT Intel version make disk image from floppy, extract file from
image, make an empty image, inject file on it and put the image on blank disk.
TRUE WINDOWS APP (modern intrface).Change image format,dfrg delete file on
image. POWERFUL BATCH ASSISTANT
Program
Location:
Programs\WINIMA25\WINIMAGE.EXE
WinRescue
95 v.6.03
WinRescue
95 v.6.03 - backs up compacts, and restores Windows95 Never reinstall Windows
95 again Restore the Registry and other configuration files in less than two
minutes. A DOS program restores the Registry even when Windows 95 won`t start
Requires Windows 95. Shareware
Program
Location:
Programs\RESCUE63\RESCUE95.EXE
WinSafe
95
WinSafe
95 it saves all vital information and restores your system back to operating
condition when you find yourself in Safe Mode or a crash. It also gives you
quick access to all the files and utilities that you need to recover. It
restores your Registry and other vital files in a second. You can even recover
from the Dos prompt if you get locked out of Windows by simply typing the word
WINSAFE . It comes with all the tools and information needed to restore. It is
easier to use than Microsofts ERU. This version 4.0 even tells you when your
system files change and to backup. And it can even reinstall Windows 95 from
the Dos prompt using your cabinet files. This is a must for Windows95 and
especially for those people who do not know how to restore hidden files registry
file
Program
Location:
Programs\WINSAF\WINSAFTY.EXE
Emergency
Recovery System 32pro V 4.2
ERS
creates backups of Win95 System files. Should the Win95 registry or other
System files get corrupted, backups will then be available to restore from. ERS
works like magic, in two minutes you can restore from backup and you will be on
your way computing instead of trying to manually troubleshoot or reinstall
Win95, saving you many hours of pain. ERS is unlike any of the disappointing
backup and restore programs , its the legitimate and the original. In addition
ERS has options to backup the Win95 Startup files and 103 vital files that
could save you from re installing.
Program
Location:
Programs\ERS42\VB5RUN(1\SETUP.EXE
Revival
Revival
can repair file system that is totally destroyed The following is the some
example that Revival can repair 1. If your hard disk is infected with virus,
and then lost all the information at the partition table, the boot sector, the
FAT, and the root directory 2. When you accidentally formatted your hard disk
3. For some reason(eg, when Windows 95 is unstable), you format the hard disk
then reinstall Windows 95. But when you found you didn`t back up all the
necessary files before doing this, Revival can help you revive the files easily
provided that they remains somewhere in the hard disk 4. If you delete the
directory including sub-directories and you make file or other directories in
that space of hard disk, you will make a lot of efforts to recover the former
data. In this case, "Undelete" or "Unerase" does not give
you satisfied job. Only Revival can save you and your files 5. When you are
doing some jobs like booting or saving data, you sometimes face the cases that
your working directory suddenly disappeared and filled with strange data Even
though there are many anti-virus programs and file system repair utilities ,
the programs cannot repair totally damaged disk in the root directory and the
FAT. They just trace the partition table and the boot record and repair only
partially damaged file system Revival can search data area of disk and repair
lost files in the totally damaged file system
Program
Location:
Programs\REVIVAL\REVIVAL.EXE
Saveme
`97
Saveme
`97 This program will save & restore your Autoexec.bat, Config.sys, System.ini,
Win.ini, Protocol.ini, System.dat, User.dat.
Program
Location:
Programs\SVME201\SETUP.EXE
SnapShot
v1.2
SnapShot
v1.2 The function of this program is to allow the user to monitor any changes
to the WINDOWS and WINDOWS\SYSTEM directories The VB4 Runtime Module,
VB40032.DLL, is required to run this program Shareware $10.00 U.S Ron Parker
(CT Software) ron2222@aol.com
Program
Location:
Programs\SNPSHT\SETUP.EXE
System
File Save
System
File Save v1.0 If you are frustrated by recurring system crashes then this
program is for you! This program backs up your AUTOEXEC.BAT,CONFIG.SYS
REGISTRY, and Windows INI files every time you bootup and stores them in
chronological directories that you can recover your files from incase your
system crashes Made for Windows 3.1/3.11 and 95(tm) users AB97
Program
Location:
Programs\SYSFS10\INSTALL.EXE
TIRAMISU
- SOPHISTICATED DATA RECOVERY V3.03
TIRAMISU
is a software for reconstructing data from a crashed hard drive It helps when
the drive is hit by a virus formatted fdisk`ed zapped by a power failure
damaged by applications TIRAMISU scans the drive even when there are physical
damages. The found data are analyzed and reconstructed. TIRAMISU can handle
drives without readable boot sector, readable Fat or readable directories. It
can handle drives that are not recognized by DOS anymore TIRAMISU automatically
creates a VIRTUAL DRIVE in memory. This virtual drive looks like a usual file
manager. You can see the lost directories and files of your crashed drive. Now
files and directories can be viewed and copied to a safe medium The extensive
use of our sophisticated pattern recognition technology enables TIRAMISU to put
the right pieces of data together again. Even disks with very few
administrative informations left can reach a high recovery quality TIRAMISU
recovers much more data than any other `disk doctor TIRAMISU is NON DESTRUCTIVE
and READ ONLY. It does not put any data onto your crashed drive. Recovered data
are restored to another destination disk, diskette, network, interlink TIRAMISU
works on DOS and Windows platforms. Better Windows95 support has been added in
version 1.03. Multi partition recovery has been added in version 2.0 A version
for NOVELL is available too. A version for HPFS is under development SYSTEM
REQUIREMENTS 286 processor and up 4 MB RAM and up Depending on the size of the
drive to be recovered we recommend a 486 with 8 MB RAM. Installing 5 MB of EMS
(Version 4) is recommended
Program
Location:
Programs\DATAREC3\TIRAMISU.EXE
TIRAMISU
FOR NOVELL - SOPH. DATA RECOVERY
TIRAMISU
FOR NOVELL - SOPHISTICATED DATA RECOVERY c) 1996, 1997 by Plug`n Play, Uwe
Gissemann INTRODUCTION TIRAMISU FOR NOVELL is a software for reconstructing
data from a crashed Novell server drive It helps when the drive is hit by a
virus formatted fdisk`ed zapped by a power failure damaged by applications
TIRAMISU FOR NOVELL scans the drive even when there are physical damages The
found data are analyzed and reconstructed. TIRAMISU FOR NOVELL can handle
drives without readable boot sector, readable Fat or readable directories. It
can recover data if you are unable to start the SERVER.EXE It can handle drives
that are not recognized by DOS anymore TIRAMISU FOR NOVELL automatically
creates a VIRTUAL DRIVE in memory This virtual drive looks like a usual file
manager. You can see the lost directories and files of your crashed drive. Now
files and directories can be viewed and copied to a safe medium The extensive
use of our sophisticated pattern recognition technology enables TIRAMISU FOR
NOVELL to put the right pieces of data together again. Even disks with very few
administrative informations left can reach a high recovery quality TIRAMISU FOR
NOVELL is NON DESTRUCTIVE and READ ONLY. It does not put any data onto your
crashed drive. Recovered data are restored to another destination (disk,
diskette, network, interlink). TIRAMISU is run from a DOS diskette or drive
TIRAMISU FOR NOVELL works on NOVELL 3.XX and 4.XX with and without file
compression A version for DOS/WINDOWS is available too. A version for HPFS is
under development SYSTEM REQUIREMENTS 386 processor and up 8 MB RAM and up
Depending on the size of the drive to be recovered we recommend a 486 with 16
MB RAM. Installing 12 MB of EMS (Version 4) is recommended GETTING STARTED 1)
Boot diskette Create a boot diskette with a CONFIG.SYS similar to this files=25
device=himem.sys device=emm386.exe Make sure you have specified the correct
drive parameters in BIOS setup Boot the computer and start the program
TIRANOV.EXE 2) Specify swap area By default TIRAMISU FOR NOVELL uses EMS as
swap area. If for some reason there is no or not enough EMS you can specify a
swap area on disk Select OPTION -> DATA RECOVERY, tag `DISK`, specify path
CAUTION: Do not swap to the drive you intend to recover 3) Restrict sectors By
default the whole drive will be scanned for Novell partitions. If for example
you *know* that the Novell partition you want to recover is somewhere between
sector 0 and sector 500000 of a 2GB drive (=4000000 sectors) you can specify
the area that will be scanned by TIRAMISU FOR NOVELL. This will speed up the
recovery process 4) Restart from last / Keep for next session The scanning of
the drive can take up to several hours. It might be a good idea to keep the
results of the drive scan for a future run of TIRAMISU FOR NOVELL. For doing
this select OPTION -> DATA RECOVERY tag KEEP FOR NEXT SESSION If you want to
use scan result from a previous session tag RESTART FROM LAST Specify a
directory if you tagged one of these options 5) Valid fat required By default
TIRAMISU FOR NOVELL exspects to find a valid fat on the drive If TIRAMISU FOR
NOVELL does not find the partitions you want to recover untag this option 6)
DET maintainance mode By default TIRAMISU FOR NOVELL uses Novell`s
"directory entry tables". If you are not satisfied with the files you
see in the "Virtual Drive" tag this option 7) Hit RECOVER for the
drive you want to recover. You can switch between the drives using the TAB key
TIRAMISU FOR NOVELL starts processing. Depending on your system`s speed and the
size of your drive this can take 1 hour or even up to 8 hours Finally you will
be shown a window containing the found Novell volumes Every entry contains the
following information Start sector of this volume Size of this volume Block size
used by this volume Score (entries with high scores are more likely to be valid
than others Select the entry that describes your lost volume best TIRAMISU
continues processing. This can take up to 2 hours 8) Copy some or all files to
a safe medium using F7 Now you see the "Virtual Drive" and you can
view and copy (registered version only) the files to any DOS-available
destination THAT`S IT! ISN`T IT EASY RESTRICTIONS Since TIRAMISU FOR NOVELL is
very memory hungry, your PC might run out of memory. If you face this problem,
install a memory manager with as much RAM and EMS as possible Watch the
available memory displayed at the bottom line. The value displayed at the far
right shows the free RAM. The E:XXX shows the free EMS The RAM should not go
below 50000 TROUBLE SHOOTING Sometimes you might think the computer is frozen
and TIRAMISU FOR NOVELL is crashed. Be patient! Some procedures might take up
to one hour. If TIRAMISU FOR NOVELL crashes you usually get an error code If
the program crashes check the available EMS and disk space. 16 MB ram with 12
MB configured as EMS are good If TIRAMISU FOR NOVELL does not find any
partition tag off the option Valid Fat required". Re run TIRAMISU FOR
NOVELL If you miss some files or directories try to tag on the option "DET
maintainance mode". Re-run TIRAMISU FOR NOVELL If you selected
"Restrict sectors" *and* "Keep for next session" you must
enter the same sector range for a further session using "Restart from last
You should not use any other `disk doctor` before running TIRAMISU FOR NOVELL
Upload a new version from our Internet site (address below If you find any
bugs, please send a description to one of the addresses below REGISTRATION
TIRAMISU FOR NOVELL IS DISTRIBUTED AS SHAREWARE. FEEL FREE TO COPY DISTRIBUTE OR
UPLOAD IT TO ANY MEDIUM. The unregistered version has all functions for
recovering your crashed hard drive. But only the registered version of TIRAMISU
allows you to COPY files from your recovered drive There are two kinds of
licenses available A limited version that can only be used for a PERIOD OF ONE
WEEK In effect this is a PAY PER USE registration. The fee is DM 590
(approximately US $390 An unlimited version that can be used for an UNLIMITED
PERIOD at one computer at the same time. The fee is DM 980 (approximately US
$650 The procedure is this Run TIRAMISU FOR NOVELL and check if it can restore
your data VIEW your files Select REGISTRATION->REGISTRATION. You will be
asked to insert a diskette in drive A:. Please have ready a blank formatted
1.44 MB or 1.2 MB diskette. This diskette will become your license diskette
later. Be aware that any data on this diskette might be damaged during this
procedure If you encounter any problems please try it again using a fresh
formatted and error free diskette Finally you will be shown a 16- or 17-letter
code Submit this code to the TIRAMISU registration service (preferably by fax,
use the form you can find in REGISTER.TXT Tel. 49-30-292 00 99 (Germany Fax
49-30-292 60 63 Email 101457.1447@compuserve.com http://ourworld.compuserve.com/homepages/data_recovery
http://www.snafu.de/user-cgi-bin/recovery Address: Plug `n Play Uwe Gissemann
Scharnweberstr. 43 D-10247 Berlin Germany Specify the kind of license you want
to purchase (7 days license or unlimited license). Send the money or credit
card information (VISA MASTERCARD or DINERS The registration key will be
forwarded to you immediately by fax or email After receiving the registration
key from us, please insert the prepared diskette. Start TIRAMISU FOR NOVELL.
Select REGISTRATION->REGISTRATION. Enter the received key in the
registration screen Ready! Now you can use COPY to save your data IMPORTANT:
Label the diskette as your license diskette. You will need it anytime you run
TIRAMISU FOR NOVELL. The license diskette can not be duplicated. This is a copy
protection The limited license allows you to recover data only from one
computer. It is not valid for other systems. (This restriction does not apply
for the unlimited license DISCLAIMER PLUG`N PLAY DOES NOT WARRANT THAT THE
SOFTWARE IS ERROR FREE PLUG`N PLAY DISCLAIMS ALL WARRANTIES WITH RESPECT TO THE
SOFTWARE EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS NO LIABILITY FOR CONSEQUENTIAL DAMAGES.
IN NO EVENT SHALL PLUG`N PLAY BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL OR
INDIRECT DAMAGES OF ANY KIND ARISING OUT OF THE DELIVERY PERFORMANCE OR USE OF
THE SOFTWARE, EVEN IF PLUG`N PLAY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN NO EVENT WILL PLUG`N PLAY`S LIABILITY FOR ANY CLAIM, WHETHER IN
CONTRACT, TORT OR ANY OTHER THEORY OF LIABILITY, EXCEED THE LICENSE FEE PAID BY
THE BUYER
Program
Location:
Programs\TIRNOV\TIRANOV.EXE
TIRAMISU
FOR NTFS - SOPHISTICATED DATA RECOVERY
TIRAMISU
FOR NTFS - SOPHISTICATED DATA RECOVERY c) 1997 by Plug`n Play, Uwe Gissemann
INTRODUCTION TIRAMISU FOR NTFS is a software for reconstructing data from a
crashed NTFS server or workstation drive It helps when the drive is hit by a
virus formatted fdisk`ed zapped by a power failure damaged by applications
TIRAMISU FOR NTFS scans the drive even when there are physical damages The
found data are analyzed and reconstructed. TIRAMISU can handle drives that are
not recognized by the operating system anymore TIRAMISU FOR NTFS automatically
creates a VIRTUAL DRIVE in memory This virtual drive looks like a usual file
manager. You can see the lost directories and files of your crashed drive. Now
files and directories can be viewed and copied to a safe medium The extensive
use of our sophisticated pattern recognition technology enables TIRAMISU FOR
NTFS to put the right pieces of data together again. Even disks with very few
administrative informations left can reach a high recovery quality TIRAMISU FOR
NTFS is NON DESTRUCTIVE and READ ONLY. It does not put any data onto your
crashed drive. Recovered data are restored to another destination (disk,
diskette, network, interlink). TIRAMISU is run from a DOS diskette or drive
TIRAMISU FOR NTFS works on any NTFS workstation or server platforms A version
for DOS/WINDOWS and for NOVELL is available too SYSTEM REQUIREMENTS 386
processor and up 8 MB RAM and up Depending on the size of the drive to be
recovered we recommend a 486 with 16 MB RAM. Installing 8 MB of EMS (Version 4)
is recommended GETTING STARTED 1) Boot diskette Create a boot diskette with a
CONFIG.SYS similar to this files=25 device=himem.sys device=emm386.exe Make
sure you have specified the correct drive parameters in BIOS setup Boot the
computer and start the program TIRAMINT.EXE 4) Specify swap area By default
TIRAMISU FOR NTFS uses EMS as swap area. If for some reason there is no or not
enough EMS you can specify a swap area on disk Select OPTION -> DATA
RECOVERY, tag `DISK`, specify path CAUTION: Do not swap to the drive you intend
to recover 3) Restrict sectors By default the whole drive will be scanned for
NTFS partitions. If for example you *know* that the NTFS partition you want to
recover is somewhere between sector 0 and sector 500000 of a 2GB drive
(=4000000 sectors) you can specify the area that will be scanned by TIRAMISU
FOR NTFS. This will speed up the recovery process 4) Restart from last / Keep
for next session The scanning of the drive can take up to several hours. It
might be a good idea to keep the results of the drive scan for a future run of
TIRAMISU FOR NTFS. For doing this select OPTION -> DATA RECOVERY tag KEEP
FOR NEXT SESSION If you want to use scan results from a previous session tag
RESTART FROM LAST Specify a directory if you tagged one of these options 5)
Fast Identification By default TIRAMISU FOR NTFS uses fast structure
recognition algorithms If you don`t see the partition you want to recover tag
this option off 6) Hit RECOVER for the drive you want to recover. You can
switch between the drives using the TAB key TIRAMISU FOR NTFS starts
processing. Depending on your system`s speed and the size of your drive this
can take 15 minutes or even up to 8 hours Finally you will be shown a window
containing the found NTFS partitions Every entry contains the following
information Start sector of this NTFS partition Block size used by this NTFS
partition Score (entries with high scores are more likely to be valid than
others Select the entry that describes your lost partition best (usually the
1st TIRAMISU continues processing. This can take up to 2 hours 7) Copy some or
all files to a safe medium using F7 Now you see the "Virtual Drive"
and you can view and copy (registered version only) the files to any DOS-available
destination THAT`S IT! ISN`T IT EASY RESTRICTIONS Since TIRAMISU FOR NTFS is
very memory hungry, your PC might run out of memory. If you face this problem,
install a memory manager with as much RAM and EMS as possible Watch the
available memory displayed at the bottom line. The value displayed at the far
right shows the free RAM. The E:XXX shows the free EMS The RAM should not go
below 50000 TROUBLE SHOOTING Sometimes you might think the computer is frozen
and TIRAMISU FOR NTFS is crashed. Be patient! Some procedures might take up to
one hour. If TIRAMISU FOR NTFS crashes you usually get an error code If the
program crashes check the available EMS and disk space. 16 MB ram with 8 MB
configured as EMS are good If TIRAMISU FOR NTFS does not find any partition tag
off the option Fast identification". Re run TIRAMISU FOR NTFS If you
selected "Restrict sectors" *and* "Keep for next session"
you must enter the same sector range for a further session using "Restart
from last You should not use any other `disk doctor` before running TIRAMISU
FOR NTFS Upload a new version from our Internet site (address below If you find
any bugs, please send a description to one of the addresses below REGISTRATION
TIRAMISU FOR NTFS IS DISTRIBUTED AS SHAREWARE. FEEL FREE TO COPY DISTRIBUTE OR
UPLOAD IT TO ANY MEDIUM. The unregistered version has all functions for
recovering your crashed hard drive. But only the registered version of TIRAMISU
allows you to COPY files from your recovered drive There are two kinds of
licenses available A limited version that can only be used for a PERIOD OF ONE
WEEK In effect this is a PAY PER USE registration. The fee is DM 295
(approximately US $195 An unlimited version that can be used for an UNLIMITED
PERIOD at one computer at the same time. The fee is DM 590 (approximately US
$390 The procedure is this Run TIRAMISU FOR NTFS and check if it can restore
your data VIEW your files Select REGISTRATION->REGISTRATION. You will be
asked to insert a diskette in drive A:. Please have ready a blank formatted 1.44
MB or 1.2 MB diskette. This diskette will become your license diskette later.
Be aware that any data on this diskette might be damaged during this procedure
If you encounter any problems please try it again using a fresh formatted and
error free diskette Finally you will be shown a 16- or 17-letter code Submit
this code to the TIRAMISU registration service (preferably by fax, use the form
you can find in REGISTER.TXT Tel. 49-30-292 00 99 (Germany Fax 49-30-292 60 63
Email 101457.1447@compuserve.com http://ourworld.compuserve.com/homepages/data_recovery
http://www.snafu.de/user-cgi-bin/recovery Address: Plug `n Play Uwe Gissemann
Scharnweberstr. 43 D-10247 Berlin Germany Specify the kind of license you want
to purchase (7 days license or unlimited license). Send the money or credit
card information (VISA MASTERCARD or DINERS The registration key will be
forwarded to you immediately by fax or email After receiving the registration
key from us, please insert the prepared diskette. Start TIRAMISU FOR NTFS. Select
REGISTRATION->REGISTRATION. Enter the received key in the registration
screen Ready! Now you can use COPY to save your data IMPORTANT: Label the
diskette as your license diskette. You will need it anytime you run TIRAMISU
FOR NTFS. The license diskette can not be duplicated. This is a copy protection
The limited license allows you to recover data only from one computer. It is
not valid for other systems. (This restriction does not apply for the unlimited
license DISCLAIMER PLUG`N PLAY DOES NOT WARRANT THAT THE SOFTWARE IS ERROR FREE
PLUG`N PLAY DISCLAIMS ALL WARRANTIES WITH RESPECT TO THE SOFTWARE EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD
PARTY RIGHTS NO LIABILITY FOR CONSEQUENTIAL DAMAGES. IN NO EVENT SHALL PLUG`N
PLAY BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES OF ANY KIND
ARISING OUT OF THE DELIVERY PERFORMANCE OR USE OF THE SOFTWARE, EVEN IF PLUG`N
PLAY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL
PLUG`N PLAY`S LIABILITY FOR ANY CLAIM, WHETHER IN CONTRACT, TORT OR ANY OTHER
THEORY OF LIABILITY, EXCEED THE LICENSE FEE PAID BY THE BUYER
Program
Location:
Programs\TIRANT\TIRAMINT.EXE
VT
Rescue 95 v 2.5 for Windows 95
VT
Rescue 95 v 2.5 for Windows 95 VT Rescue 95 is an emergency medical system
designed to help you prevent problems, recover, control, analyze repair and
tune up your Windows 95 system Even in a case of a very serious crash, VT
Rescue 95 should be able to recover your configuration VT Rescue 95 is a
collection of utilities (ScanREG RegMAN, Diagnosis, VTSYS startup control, VTLX
Task Manager File32, BootMAN, ScanMEM, LoadFailed Search and more
Program
Location:
Programs\RESUS97\RESUS97.EXE
TreeSize
1.44 (95/98/NT) TRY IT!
Every
hard disk is too small if you just wait long enough. Treesize tells you where
precious clusters have gone. From the context menu of a folder or drive,
TreeSize shows you the size of this folder, including all subfolders. You can
expand this folder in Explorer-like style and you will get the size of the
subfolders. It works like the UNIX-command "du" with a Windows
graphical user interface. Scanning is done in a thread and the wasted space can
be displayed. The results can be printed in a report.
Program
Location:
Programs\hd\treesize\Treesize.exe
Disk
Analyzer 1.1 (95/98/NT) TRY IT!
A
useful FREEWARE Windows 95/98/NT utility that allows computer owners to analyze
disk space usage. It's easy to use and fast. With just a few clicks of your
mouse you can make analysis of the selected drive or directory. Program
provides flexible summary and sort functions so that the disk space usage
information is readily accessible in a variety of ways. Find and delete quickly
old, large files to recover disk space! New in v1.1: finds duplicate files; new
status window; right mouse click on any individual item in the summary window
opens MS Explorer with the selected directory.
Program
Location:
Programs\hd\disk analyzer\Disk.exe
ZipAdvisor
1.2 (95)
Will
scan directories and report on the total size of zipped and unzipped files.
Great for finding bloated directories! Will scan all subdirectories, sort by
any column, and report on how long ago files were accessed as well. Quick &
easy.
Program
Location:
Programs\uninstall\zipadvisor\zip_advisor.exe
XFolder
0.4 (95/98/NT) TRY IT!
A
useful freeware Windows95 utility that allows computer owners to analyze hard
disk folder sizes. With the help of this software you can locate easily where
large amounts of data are located on your hard disk. It is really easy to use
and it does not require much hard disk space.
Program
Location:
Programs\hd\xfolder\setup.exe
DirectX
Uninstall .01 (95/NT)
Beta
version , without full english. Please contact us at alesifan@hotmail.com for
Bugs.
Program
Location:
Programs\uninstall\directx\frmdx6.exe
RealUninstall
(95/98/NT) TRY IT!
Fixes
the known annoying problem of some uninstall applications that do not delete
its uninstall path from the registry, so that it seems that the application is
not yet uninstalled, while it is. RealUninstall does not delete program files
or applications, it only deletes the uninstall information from the registry.
Program
Location:
Programs\uninstall\realuninstall\Dru.exe
Add/Remove
4Good 1.5 (95/98/NT)
How
many times have you tried to uninstall a program using Control Panels'
Add/Remove programs and found out that you just can get rid of it? The
Add/Remove 4Good utility will help you to remove these stubborn applications
for good. It is intended for Windows users who wish to keep their system clean.
It has a slick and easy to use user interface with fast access from the system
tray. Misbehaved shareware can be installed without the fear of having it stuck
forever in the Add/Remove list. Add/Remove 4Good tries first to uninstall the
application and only later (if necessary) forces the application out of the
Add/Remove list. You also get a history log that lists all the applications
that were uninstalled.
Program
Location:
Programs\uninstall\4good\addremove.exe
Add/Remove
Cleaner 2.01 (95/98/NT)
A
Windows95/NT program for cleaning up that list of application uninstallers. If
you anything like me you probably have tons of programs that you have deleted
listed there. This will let you take them off the list with a click or two.
This program does not delete any files, anything you remove from the list will
still be on your hard drive.
Program
Location:
Programs\uninstall\cleaner\addrmclr.exe
MegaSweep
for Windows 1.09 (95/98/NT) TRY IT!
A
FREEWARE Windows 95/98/NT utility that allows you to delete unwanted files from
your entire workstation or server file system. With MegaSweep, you can easily
create profiles for files you want to delete from a directory, folder, drive or
computer across the network. Each profile defines a start location, file
specifications, and the option to delete files based on creation date.
Program
Location:
Programs\fileutils\megasweep\setup.exe
CyberMedia
Uninstaller Trial Version
CyberMedia
Uninstaller Trial Version
Program
Location:
Programs\CYBUNINS\UNITRIAL.EXE
Deft
App Remover - Version 1.2
Deft
App Remover - Version 1.2 Uninstall Windows applications and determine changes
to your system made by those nasty installation programs. Easy to use and
powerful Works under Windows 95
Program
Location:
Programs\DAR\DAR.EXE
DIRTOT
Directory Totals V1.8
DIRTOT
Directory Totals V1.8 SAVE MONEY! Don`t buy a BIGGER disk clear off those files
that are hogging all the space. DIRTOT helps you FREE your disk space by giving
you the INFORMATION YOU NEED in a FORM YOU CAN USE! Its customizable reports
provide more than a dozen data points for every directory on your disk -
including the total space used by entire directory trees - information you can`t
get anywhere else. NEW! Combined totals for multiple drives. See your disk as
you`ve never seen it before! From Quincunx Software, for MS-DOS, compatible
with Windows 3.x, 95, OS/2
Program
Location:
Programs\DIRTOT\DIRTOT.EXE
EasyClean
EasyClean
is a deinstallation system. It is a very powerful tool to obey all the software
installed on your computer. EasyClean is designed and tested for Windows 95 and
Windows NT 4.0. The major strength of EasyClean is handling changes in the
Windows registry. This should no longer be a grave for information This
powerful tool is designed for advanced users, who wants to keep the
registry,directories and ini-files clean THIS PROGRAM WILL DELETE FILES AND
INFORMATION IN YOUR CONFIGURATION FILES. So it is not a tool for beginners
Program
Location:
Programs\EZCLEAN\EASYCLEA.EXE
EasyClean32
EasyClean
is a deinstallation system. It is a very powerful tool to obey all the software
installed on your computer. EasyClean is designed and tested for Windows 95 and
Windows NT 4.0. The major strength of EasyClean is handling changes in the
Windows registry. This should no longer be a grave for information This
powerful tool is designed for advanced users, who wants to keep the
registry,directories and ini-files clean THIS PROGRAM WILL DELETE FILES AND
INFORMATION IN YOUR CONFIGURATION FILES. So it is not a tool for beginners
Program
Location:
Programs\EZCLEN\EASYCLEA.EXE
File
Flusher 95
File
Flusher 95 v1.0 - Temporary File Removal Utility File Flusher 95 removes
temporary files - resource-eaters created by most Windows applications and even
Windows 95 itself! Rescue your resources, and free up hard drive space in a
quick and simple manner. Very easy to use and has very comprehensive
helpFlusher 95 will be uninstalled
Program
Location:
Programs\FLUSH95\SETUP.EXE
Freeman
Installer & Uninstaller v2.2
Freeman
Installer & Uninstaller v2.2. An install utility for Windows applications
Visual IDE. Automatic test run, make build, disk set building. One-mouse click
Multi-lingual support. Built-in near-pkzip (de)compression. Uninstall Works
even on aborted installations Modifies AUTOEXEC.BAT and CONFIG.SYS Displays 256
color bitmaps in custom dialogs. Installs extra-ordinarily large files spanning
across disks.Customizable Online help in installer for all supported languages.
Installs (TT) fonts Version checking (works on your own DATA FILEs too!).
Background buttons and gauges like InstallSHIELD. Time stamp file size
checking. Sets INI entries Sets registration keys. integer/boolean variables
and expr`s with most C/C++ int operators. Conditional event execution Asks for
& encrypt user info
Program
Location:
Programs\FINST22\INSTALL.EXE
More
Space Windows `95/NT4 Disk Utility
More
Space Windows `95/NT4 Disk Utility reclaim valuable disk space. Locates file
duplicates, file hogs, old and obsolete files. Files can be immediately deleted
or compressed or sent to the recycle bin Compare file duplicates on a split
screen Plenty of new 3D statistics including file ages, sizes, averages, access
times, etc
Program
Location:
Programs\MORSPC28\SETUP.EXE
Quality
Software CleanUp Version 2.2
Quality
Software CleanUp Version 2.2 CleanUp is a Windows 95 program which allows you
to quickly and easily delete unneeded temporary files through the included DOS
batch files; you can customize and edit these through the program CleanUp
includes many advanced features, such as password protection for the program to
prevent unauthorized users from deleting files; it also allows you to change
program item captions disable the beautiful start-up screen and it comes with a
useful feature which tells you the exact time you last cleaned your hard drive.
One of the best features allows you to search for temp orary files on your
system. It has two user defined setups which allow the user to add items to the
program to delete, plus you can change the check box item captions for these 2
setups. Also, to save time the check boxes that were checked when you cleaned
up can be saved to stop you from having to re-check the boxes every time you
start the program. A 486 and Windows 95 or NT 4.0 required
Program
Location:
Programs\CLENSF\SETUP.EXE
RECLAIM
IT!
This
program was designed to help you find and deal with files that are just taking
up space on your hard drive. Reclaim It! is shareware...if you find this
program useful, share it with any friends that might find it beneficial.
Program
Location:
Programs\RECV301\SETUP.EXE
Remover
Uninstaller for Windows
RemoveR
helps you to prevent unused junk from filling your hard drive
Program
Location:
Programs\RMVR32\SETUP.EXE
Removes
temporary files and cache folders
Automatically
remove temporary files and cache folders
Program
Location:
Programs\CC311\CC311.EXE
ShowMan
ShowMan
- Windows 95/NT program to help recover disk space. Gives pie-chart view of
disk usage with the ability to drill down into directories Shows actual or
nominal space occupied. Borland Delphi 3.01 with most source
david.taylor@gecm.com
Program
Location:
Programs\SHWMN238\SHOWMAN.EXE
Smart
Cleaner for Windows 95
Smart
Cleaner 1.0 Simply cleans your system from all files that don`t have any kind
of utility except slowing down your hard drive access-time
Program
Location:
Programs\SMCLNR\SETUP.EXE
Software
Manager 6.0
Software
Manager 6.0 provides three wizards to manage your software The Uninstall Wizard
supports manual and automated uninstalls Manual mode creates a step-by-step
procedure. Automated mode performs system updates with your confirmation.
Removal of pre-existing software is easy and safe. Removes DLL, VBX files. The
Install Wizard generates report of changes made during software install and
simplifies evaluation of Shareware / Internet downloads. Configuration File
Wizard w/ auto backup Nag-free evaluation period. Registration Fee $19.95
Program
Location:
Programs\SFTMGR\SOFTMGR.EXE
Space
Watch Pro
This
version of Space Watch pro is intended for 32-bit Windows operating systems -
e.g. Windows 95 or NT.
Program
Location:
Programs\SWATCH3\SETUP.EXE
SpaceTracker
SpaceTracker
A Windows 95/NT 4.0 system utility that monitors selected local/network drives
for free space and notifies you when
Program
Location:
Programs\SPCT9611\SPACETRA.EXE
SpyDir
Analyze
your hard disk and free up valuable disk space Is your hard disk full? Mine
was. That`s why I wrote SpyDir, to show me where all my disk space was being
used up, and how much wasted space was being taken up by bad disk partitioning.
SpyDir shows both numerically and graphically, all of your subdirectories and
files the space each one occupies, and the percentage it uses of your entire
disk . Using this information you can delete unused directories and files and
free up much needed disk space.
Program
Location:
Programs\SPYDIR30\SPYDIR30.EXE
Version
Info
Version
Info 1.0, check file version of DLL/EXE/VBX/OCX files and find duplicates.
Freeware, Win3.1
Program
Location:
Programs\VINFO10\VERSINFO.EXE
VT
CleanMAN v 2.0
VT
CleanMAN v 2.0 VT CleanMAN searches for and may clean files depending on
activated filters (error producing files, empty files obsolete files, duplicate
file names, read only, system hidden, new files, internet cache, shortcuts,
images cookies, etc You can create and combine up to 100 filters, exclude files
from search and restore deleted files. A launch button enables you to check up
on linked programs before deleting a file VT CleanMAN scans any drive, prevents
problems, frees your disk space, and displays disk and files information
Program
Location:
Programs\CLEANMAN\CLEANMAN.EXE
ActiveX
Uninstaller v1.1
This
program is simply a shell for the DLL register Regsvr32. It makes it easier to
uninstall ActiveX controls by eliminating the need to type in long commands,
and logging the registration and deletion of files
Program
Location:
Programs\AZUN1_1\SETUP.EXE
Advanced
Space Hunter
Advanced
Space Hunter The perfect companion to analyze your disks and save space
Graphical disk`s space analysis Duplicate, temporary, same name zero-size,
cluster space waste Try it free. New improved version
Program
Location:
Programs\ASH074\SETUP.EXE
RegSnap
1.0 (95/98/NT) TRY IT!
Helps
you to analyze system registry changes. RegSnap can save the registry snapshot
to file (in internal format) and then compare two snapshots and report results
(list of new, changed and deleted registry keys).
Program
Location:
Programs\regutils\regsnap\setup.exe
eXtended
Registry Search 1.0 (95/98/NT) TRY IT!
Searches
in all Registry Items (Keynames, Classnames, Values/Data, etc) for matching
expressions.
Program
Location:
Programs\regutils\extended\xrs.exe
Extension
Viewer 1.0.0.26 (95/98/NT) TRY IT!
Extension
viewer is an analysis tool for viewing the programs, extensions and actions
stored in the Windows registry.
Program
Location:
Programs\regutils\exviewer\ev.exe
InWatch95
1.3a (95/98)
Track
changes to Windows 95 directories, win.ini, system.ini, msdos.sys and Registry
(system.dat & user.dat) from session to session and during new application
installation.
Program
Location:
Programs\regutils\inwatch\setup.exe
PACT
JumpReg 98 98.8 (95/98/NT) TRY IT!
Jump
to and bookmark user defined registry keys! Keep up to five different keys for
direct access. This is a surprisingly simple and usefull feature. You can
create a shortcut to jump directly to your most used registry keys. Dialog to
manage keys, create shortcuts per click.
Program
Location:
Programs\regutils\jumpreg\jmpreg98.exe
Reg
1.0 (95/98/NT)
Command
line tool for editing the registry. Works on local and remote registries.
Program
Location:
Programs\regutils\reg\Reg.exe
WinRescue
98 2.06 (98)
Backs
up, compacts, and restores the Registry of Windows98. WinRescue 98 streamlines
the registry, compresses files,
regularly prompts for backup, has changeable directories, backs up current
or previous registry, backs up to
diskette.
Program
Location:
Programs\regutils\winrescue98\setup.exe
WinRescue
95 7.04 (95)
Backs
up, compacts, and restores the Registry of Windows95. WinRescue 95 streamlines
the registry, compresses files, regularly prompts for backup, has changeable
directories, backs up current or previous registry, backs up to diskette. We
also offer WinRescue 98 for Win98.
Program
Location:
Programs\regutils\winrescue95\setup.exe
Sedit95
1.1 (95/98) TRY IT!
System
file editor and more for Windows 95.
Program
Location:
Programs\regutils\sedit95\setup.exe
Tweak
Reg 1.1 (95/98/NT)
Picks
up where System Hacker left off allowing you to change loads of functions in
your Windows registry, including adding files to the registry version of the
startup group, editing entries in the add/remove programs control panel applet,
how fast the start menu is displayed, and lots more!
Program
Location:
Programs\regutils\tweakreg\setup.exe
ProStream
RegWeb 1.0 (95/98/NT) TRY IT!
Enables
Windows registry administration using standard Web browsers. RegWeb is a
powerful tool for System Administrators who have the need to remotely manage
Windows registries. RegWeb contains a robust feature set including support for
accessing, modifying, inserting, and deleting registry keys and values from
remote locations using any frames-capable Web browser.
Program
Location:
Programs\regutils\prostream\RegWeb.exe
RegAid
95 1.0 (95)
Allows
Windows users to customize several Windows settings stored in the registry.
Users can change the registered user, company, and product id information shown
in the system properties dialog box. Other features include the ability to
change the "Tip of the Day" messages, set a default user name and
password to be used during Windows logon. And finally an Add/Remove programs
feature that allows users to delete a program name from the Add/Remove list if
Windows cannot uninstall the program.
Program
Location:
Programs\regutils\regaid95\setup.exe
Multi-Remote
Registry Change 2.0 (95/98/NT)
The
easiest way to change the registry on multiple remote computers running Windows
NT. Select the computers from a list indicate the change(s) and click Run! Now
supports REGEDIT4 files, scripted changes, Change User Rights, Shutdown
Systems, Check for Key or Value and More! Multi-Threaded; Multi-Instance --
make several changes at once!
Program
Location:
Programs\regutils\multireg\setup.exe
MSDOS
Editor 2.0 (95) TRY IT!
A
utility that makes it easy to edit the fie MSDOS.SYS. You only have chekc or
uncheck the boxes and select some options from a pulldown menu. After clicking
the Accept button, the actual editing will be done for you. Beside that MSDOS
Editor does a lot more. First of all it makes a backup of the old file, to
restore it when you might meet problems. And it also cleansup MSDOS.SYS Entries
that are equal to the Windows default values are removed, because the are not
really needed. Beside that it moves all entries that are placed below the 'fill
up lines' above these lines, where they belong. This keeps the file clean and
it makes it easy to see all properties at once whenever you might need to
inspect the file with a normal text editor.
Program
Location:
Programs\regutils\msdoseditor\setup.exe
RegMonEx
2.0 (95/98)
A
registry monitoring tool. It logs every access to you registry. This version
has major improvements for filters.
Program
Location:
Programs\regutils\regmonex\RegMonEx.exe
Extension
Manager 1.0.0.41 (95/98/NT)
This
system management/analyzing tool helps you to take a deep look into the Windows
registry and to assign files with programs the way *you* prefer.
Program
Location:
Programs\sysdiag\extmanager\eman.exe
Configuration
LifeGuard for Windows 95
The
purpose of the program: configuration and main system files backup &
restore utility for Windows 95, by Visual Fantasy
Program
Location:
Programs\CLG95T\CLG95T.EXE
INST-ALL
INST-ALL
(v3.30) Install/Uninstall Utility Run before installing any new software. It
notes your set-up, installs the new software then compares any differences in
your set up. The results are saved in a report file You can easily uninstall
the software at a later date & be sure that no trash is left on your disk
or in your system files. Even uninstall programs do not always clean up
properly. Inst-all is FreeWare
Program
Location:
Programs\INSTL330\INST-ALL.EXE
Installation
and Uninstallation for Win95/NT 4.0
Installation
and Uninstallation for Win95/NT 4.0
Program
Location:
Programs\EZYSP32\EZYSP32.EXE
Installation
Watcher
Installs
and will deinstall all program files completely
Program
Location:
Programs\WATCHI\WATCHI.EXE
ChangeRes
1.0
This
is a simple utility that lets you instantly resize your monitor`s resolution.
When you run the program, you get a small dialog with four buttons. Just press
the button that corresponds to the resolution you want, and ChangeRes will
adjust your monitor`s settings instantly This utility is perfect for use with
games that are finnicky about graphics settings. It can also be used by
webmasters and programmers that want to see how their applications and Internet
sites will look on different computers
Program
Location:
Programs\CHNRES\CHANGRES.EXE
MagicRegistry
MagicRegistry
Version 1.0 The program erases an item of the list box in Control Panel/Install
Applications dialog without cancelling the connected program from hard drive
You can cancel an item on selecting it from the initial list showed by
MagicRegistry and push "elimina voce" button This program is useful
if you have a lot of bad entries in the uninstall section of the system
registry With MagicRegistry you can say STOP to error messages during
uninstallation tentatives of "false" items in the Control Panel list
for example if you have uninstalled an application without the automatic
procedure
Program
Location:
Programs\MAGICREG\MAGICREG.EXE
Registoy
The
Registry is one of the most important parts of Windows 95 If something happens
to the Registry you have problems The Registry controls almost every aspect of
Windows 95 It tells it how its supposed to look and how to react to programs
and files plus more Registoy was made out of necessity, I got tired of
installing programs in Win95 and have them associate files to the newly
installed program such as jpg, gif, ect..
Program
Location:
Programs\REGISTOY\SETUP.EXE
Registry
Search & Replace v2.00
Registry
Search & Replace v2.00
Program
Location:
Programs\REGSRCH2\SETUP.EXE
RegView
for Windows 95
RegView
for Windows 95 This unregistered trial version will allow you to use 30 times
with complete functions of RegView. After the maximum number of trials has been
reached, you need to register and get register key to continue the use of
RegView
Program
Location:
Programs\REGVIEW\REGVIEW.EXE
Set
Me Up 97 - Windows 95 system configuration tool
Set
Me Up 97 - Windows 95 system configuration tool The aim of the application is
to cover all the system set-up/customization features that are either hidden or
not directly avaliable to the user. The application also offers several
enhancements to the operating system features
Program
Location:
Programs\SMU335\SETUP.EXE
Setpri
Setpri
is a quick and dirty little program which allows you to examine and change the
priorities of Windows 95 processes
Program
Location:
Programs\SETPRI\SETPRI.EXE
Smalreg3
Smalreg3.zip
contains ver 3.0 of a procedure to compress Win95 registry files reguardless of
their size, or the size of the key values within the registry. It overcomes the
problem detailed in MS Knowledge Base article Q132064 and therefore works on
those registry files that normally produce an error message or system hang when
the "regedit/ c" command is used The archive contains unformatted
ascii text and Word7 files along with a copy of Q132064
Program
Location:
Programs\SMALREG3\TROUBLES.EXE
VT
RegMAN v 2.0 for Windows 95
VT
RegMAN v 2.0 for Windows 95 VT RegMAN is a registry manager designed to hel you
save and restore your Windows 95 configuration No Backup ? VT RegMAN should be
able to rebuild your configuration or to create a new one Windows can`t load ?
This package also includes dos programs so as to repair your configuration
Program
Location:
Programs\VTREGMAN\VTREGMAN.EXE
ChangeReg
ChangeReg
allows registry changes from the command line. This allows system
administrators, and crafty users, to automate changes to setup files in a batch
file
Program
Location:
Programs\CHGREG01\CHANGERE.EXE
WinHacker
WinHacker
- Configure hidden settings of Win95
Program
Location:
Programs\WH95V2\WH95V2.EXE
CPU
Indicator 1.1 (95/98/NT)
Shows
Win 95 CPU usage like Win NT. It can be accessed from within taskbar tray and
allowing you to see CPU usage chart from one click of a pop up menu or hide
chart and monitor CPU usage by icon in taskbar tray. The monitoring always will
inform you, what application causes the computer to crawl.
Program
Location:
Programs\cpu\indicator\cpusetup.exe
CPU
Monitor 1.3b5 (95/98)
CPU
Monitor adds an icon to the Windows 95 System Tray, which shows the current
utilisation of the systems processor. Requires the VB 5.0 Runtimes.
Program
Location:
Programs\cpu\monitor\CPUMon.exe
Rain
1.0 (95/98/NT) TRY IT!
Especially
designed for overclockers (or for severe heat conditions), Rain is a special
CPU cooling software. What makes it different from other CPU cooling software
(such as Waterfall and CPUIdle) is the fact that it has a different concept:
"Extreme Cooling!" - Rain will give you an extra temperature decrease
that is ideal for overclocked CPUs.
Program
Location:
Programs\cpu\rain\install.exe
Waterfall
1.23 (95/98/NT) TRY IT!
Decrease
your CPU temperature up to 30C! Waterfall is a wonderful little program that
uses advanced instructions found in Intel, Cyrix, AMD and IDT CPUs (Pentium or
later) to make them run much cooler, without any loss in performance or
stability! Instead of replacing your fan/heatsink combo, give Waterfall a try!
You'll wonder how you've ever lived without it! Waterfall is the most efficient
and bug-free CPU cooling utility for Windows 95/98! This new version has a much
better installation utility and adds uninstall support as well!
Program
Location:
Programs\cpu\waterfall\install.exe
FastVid
1.10 (95/98/NT) TRY IT!
A
utility which enables P6 "Write Combining" on Pentium Pro and Pentium
II systems.The result is far better performance in graphics programs such as 3D
games or profssional rendering software. Speedup can be as high as 100 %.
Program
Location:
Programs\cpu\fastvid\fastvid.exe
SysEnhance
Lite 6x86 (95/98/NT)
Optimizes
the Cyrix 6x86 and 6x86MX processors under Windows NT 4.0 and Windows 95. What
it can do: Reactivates the write back cache, Makes Windows 95 detect a Pentium
processor,...) Up to a 50% performance increase.
Program
Location:
Programs\cpu\sysenhance\6x86cfg3tl.exe
CPU
Idle (Win 95/98/NT)
Optimizes
your CPU and suspends operation when it's not being used. Under normal
circumstances, your PC spends much of its time waiting for commands and data
input. CPUIdle turns off the microprocessor while it's idle, which can keep
your CPU from overheating and extend its life. It can also stabilize an
overclocked system. CPUIdle does not slow down the performance of your PC at
all, and it can enable certain options that may actually improve the overall
performance.
Program
Location:
Programs\cpu\cpuidle\Cpuidle.exe
KiLLCMOS32
1.0 (95/98/NT) TRY IT!
Basically
"resets" your computer's CMOS settings to the factory defaults. It
works with ALL CMOS. KiLLCMOS32 only changes checksums & values that makes
the motherboard CMOS revert back to factory defaults. Removes forgotten CMOS
BIOS passwords as well. Better than draining that battery!!
Program
Location:
Programs\sysdiag\killcmos\KiLLCMOS32.exe
486CACHE.COM
This
program allow you to turn the 80486`s (and above) internal cache on and off.
Usually your cache should be left enabled, but some software may not work with
caching enabled. In particular, Sierra and Dynamix games will not work
correctly with the CMS Sound Blaster if caching is enabled. Also, you can
disable the cache to slow down programs that run too fast on a 486. Origin`s
Wing Commander is a good candidate for this, especially if you have a fast
video board
Program
Location:
Programs\FOURCC\TROUBLES.EXE
6x86
optimization for NT 4.0
6x86
optimization for NT 4.0 (up to 75% perf. increase
Program
Location:
Programs\6X86CFG\6X86CFG.EXE
CACHECHK
CACHECHK
will do memory accesses to check out the L1 and L2 cache, tell you the speeds
and sizes of each, and check to see if all of your memory is cached, or if some
is non-cached POSTCARD-WARE, not shareware or freeware CACHECTL allows you to
turn the L1 cache on or off, and tell you if it`s enabled or disabled
Program
Location:
Programs\CACHCHK6\CACHECTL.EXE
CMOS.COM
CMOS
save and restore program
Program
Location:
Programs\CMOS93CD\TROUBLES.EXE
CMOSBAK
CMOS
RAM backup and restore utility for IBM AT`s and compatibles
Program
Location:
Programs\CMOSBU\CMOSBAK.EXE
FISTBUG
This
program tests for a bug in the Pentium Pro and Pentium II floating point unit.
This program may be run on a variety of microprocessors from the 80286 on up.
For a complete description of the bug, please refer to
http://www.x86.org/secrets/Dan0411.html
Program
Location:
Programs\FISTBUG\FISTBUG.EXE
Turbo
for Windows 95 and NT
Turbo
for Windows 95 and NT August 1997 Keywords Turbo Windows NT Utility Description
Software "Turbo Switch". Set the effective CPU speed 1-100 of full
speed. All programs now run at this reduced speed Useful for following
situations 1) A program with CPU timing loops needs to be slowed down 2)
Software being debugged needs to be slowed down, to see details of graphic
output sequence 3) Software needs to be tested under adverse load, or
performance evaluated for slower CPU Requirements
Program
Location:
Programs\TURBO\TURBO.EXE
Easy
Com 1.5 (95/98/NT)
The
purpose of Easy Com is to, in an easy and reliable way, test communications
with various peripheral devices in the 32 bit Windows environments, and to
display data and signals in a logical and understandable way.
Program
Location:
Programs\commutils\easycomm\EasyCom.exe
Parallel
Port Monitor 1.0 TRY IT!(95/98)
Utility
to spy on the parallel port. Provides a graphical view of the connector,
indicating pin high/low status with different colors. Also has editable
decimal, binary, and hexadecimal fields allowing individual registers to be
viewed and modified.
Program
Location:
Programs\commutils\parallel\parmon.exe
CTS
IOInfo v1.1
CTS
IOInfo v1.1 identifies which I/O addresses are used in the computer. Use IOInfo
before installing a new sound card modem or other device to make sure that the
address selected is available. IOInfo runs in DOS and should also be run in
each operating system used by the computer (Windows, Windows 95, Windows NT and
OS/2). The registered version saves all report information to disk combines the
reports into a single report
Program
Location:
Programs\IOINFO\IOINFO.EXE
CTS
SERIAL PORT UTILITIES v4.2
CTS
SERIAL PORT UTILITIES v4.2: -PortInfo PortMaster Detect Com ports & IRQs
used conflicts & ports that can`t generate IRQs Supporting utilities solve
many problems New in 4.2 - Modem Speeds are Reported! - Run PortInfo /L"
or PortMaster from DOS to find most modem installation & setup problems.
All Com ports with working modems are clearly identified. Additional Windows
setup tests for registered users
Program
Location:
Programs\CTSSPU\RTS.EXE
Comset
13 Modem/Uart/Serial Port tester
Comset
13 Modem/Uart/Serial Port tester Test, setup ports/modems/uarts. Ver 13
supports Com1-4, IRQ2-15, speeds to 115200bps. Returns errorlevels to batch
files depending on modem`s state Enable/Disable 16550AFN uart buffers Also
swaps ports, logs in Com3&4 to DOS displays port status. With docs
Program
Location:
Programs\COMST13\COMST13.EXE
Comspeed
1.97 for Windows
Comspeed
1.97 for Windows Shows performance of your modem Features Autodetects aktive
Com-Port Counter for each Com-Port Writes Log-file with aktivities Int 14
support Windows 95 Dial-Up Network Shareware: $ 10, SWREG: 10826 Stefan Cordes
100331,3700
Program
Location:
Programs\CMSPD\SETUP.EXE
COMTST
COMTST
- Serial port tester
Program
Location:
Programs\COMTST\COMMTEST.EXE
BAYLINK
BAYLINK
is an MSDOS RS232 communication tool which enables serial data to be
manipulated and displayed as it is sent or received from your standard IBM
compatable PC via any serial port Any aspect of the serial port can be examined
or changed
Program
Location:
Programs\BAYLINK5\BAYLINK.EXE
CCLINK
and CCLINKjr
CCLINK
and CCLINKjr are Windows-compatible communication programs that allow users to
monitor their serial and parallel ports by displaying lighted LEDs on the
desktop. Perfect for internal modem users! CCLINK even allows you to talk to
your modem. New Data Capture and Connect Message display
Program
Location:
Programs\CCLINK15\CCLINK.EXE
DirectParallel
Connection Monitor
DirectParallel
Connection Monitor(TM) - Diagnostic utility for testing DirectParallel(TM)
cables under Microsoft Windows 95. DirectParallel Cables allow high-speed
PC-to-PC connections between any two Windows 95 systems ... and the software is
already built into Windows 95 ... it's called the Direct Cable Connection.
DirectParallel cables are the appropriate parallel port cables to use with the
Win95 DCC This program, the Connection Monitor, is an additional utility
designed to help to set up, configure, test, and explore PC-to-PC cable
connections NOW! PC Anywhere32 and Laplink for Windows 95 now have built-in
support for DirectParallel cables ... so you can use the high-speed cables with
these excellent software packages ... right out of the box Read CABLES.TXT for
more information on the DirectParallel cables DirectParallel Connection Monitor
provides information about your computer and your computer's parallel ports
Speed, Data Integrity, and Endurance tests for DirectParallel cables a Direct
Cable Connection Wizard to fine tune your DCC connections real-time access to
software statistics about your connection.
Program
Location:
Programs\DPM171B\DPM.EXE
IRQInfo
v1.6
IRQInfo
v1.6: Accurate IRQ system snooper Uses most devices to force IRQs for accurate
detection. Tests for drives, networks, sound cards, Com ports, printers,
modems, scanners SCSI...everything that uses an IRQ. <ASP IRQInfo is simple
to use & presents an easy to read chart showing how each IRQ is used in the
computer. IRQInfo PRO includes additional tests & a TSR module to detect
more devices
Program
Location:
Programs\IRQINF\IRQINFO.EXE
Parallel.Exe
Parallel
Port Information Utility
Program
Location:
Programs\PARA14\PARALLEL.EXE
Fix
It
Fix
It: Utility for diagnosing system problems/conflicts..etc
Program
Location:
Programs\FIDEMO\FIDEMO.EXE
PCI.EXE
This
program is for viewing or changing registers in PCI configuration space
Program
Location:
Programs\PCI07\PCI.EXE
Rosenthal
Conflict Resolver
Rosenthal
Conflict Resolver v1 -<ASP Professional diagnostic tool utility from
Rosenthal Engineering corrects IRQ, DMA and I/O conflicts, the major cause of
system crashes, installation and configuration errors etc. Works by analyzing
activity during operation DOS, Windows, Win95, NT, OS/2 *NEW
Program
Location:
Programs\RCFLRS\RCR.EXE
Modem
Statistics 1.0 (95)
It
is a program that analyzes the windows file Modemlog.txt and give you
statistics about your modem.
Program
Location:
Programs\modem\modemstats\Mstat.exe
Modem Monitor Graph 1.0 (95/98) TRY IT!
Modem
Monitor plots Dial-up-Adapter's Sent and Received bytes. Fully customizable
display.
Program
Location:
Programs\modem\monitorgraph\Modemgph.exe
Modem Doctor
for Windows
Modem
Doctor for Windows Ver 1.0 - The power of Modem Doctor in the Windows program
environment. Includes over 60 tests of your modem and serial port interface.
Built-in INI editor makes setting up windows a breeze. Extensive Interactive
Help file, Built-in Terminal automatic detection of port conflicts report
generator and much more
Program
Location:
Programs\MODEMW\MDRW.EXE
Modem
Doctor 6.0 External Driver File
Modem
Doctor 6.0 External Driver File External Driver File For Modem Doctor 6 Adds
support for the ZyXEL 2864 series modems. Installation is simple, just place
the MDR6.DRV file in the same directory as Modem Doctor
Program
Location:
Programs\MDRDRV\TROUBLES.EXE
Modem
Doctor 7.0S
Modem
Doctor 7.0S,modem/uart diagnostics Picked as "best comm utility" by
many technical authors, Modem Doctor performs over 60 tests of your
modem/serial port hardware including; self-connection and Id`s IRQ`s. Works
with Modem Doctor for Windows to isolate Windows Comm errors Supports all
IRQ`s, FOSSILS, Digiboards
Program
Location:
Programs\MODEMD70\MDR.EXE
Modem
Wizard 97
Modem
Wizard 97
Program
Location:
Programs\MWIZ_TR\MWIZ_TR.EXE
Any
Speed version 1.1 for Windows 95
Any
Speed helps you to define the data transfer speed in a network With this
program you can measure the real transfer speed between Internet provider and
your computer and define the time when Internet speed is highest Also Any Speed
can measure speed of a local network or a CD ROM driver, and shows the results
in a graphical kind Any Speed puts the results in the trend file and can build
the trend chart of any day Any Speed allows you to connect to a Dial-Up Network
with much greater ease. It will automatically press connect for you on the
Connect To dialog box With AnySpeed you can run a programs when network speed
has some value. For instance it allows you to run Microsoft Exchange when
network connection is established
Program
Location:
Programs\ANYSPD\ANYSPEED.EXE
FMH
MemInfo 1.0 (95/98/NT)
A
simple memory status viewer. VERY SMALL (only 15k), no unnecessary overhead.
Snaps to screen border, saves status, takes no unnecessary screen space. Can
even be run in taskbar tray area.
Program
Location:
Programs\memory\meminfo\meminfo.exe
Mem
Stat II (95/98/NT) TRY IT!
Shows
you how much memory Windows is using in real-time. If you minimize it, it will
show you how much memory Windows is using together with the % used of your
total swapfile. Watch them Numbers rise gradually by 10 Meg as you load Word
97! I use this because to speed up Windows 95 I have Set the Swapfile to 24Mb
(Min) and defragged it with Norton Speed Disk. If you only let windows manage
the swapfile, you can see what it is doing! The program features a graph that
will show the history of memory usage on your machine for the last 100 Seconds.
You can set the Start Minimized box, and the program will always start on the
task bar and display the mem in use.
Program
Location:
Programs\memory\memstat2\setup.exe
Magic
Memory Monitor 2.0 (95/98/NT) TRY IT!
A
small program to sit in your system tray and monitor your memory usage. It can
also defrag your memory at regular intervals or whenever you choose to do so.
Program
Location:
Programs\memory\magic mem\setup.exe
FreeMem
Professional 4.0 (95/98/NT)
Helps
you enhance the performance of your PC by freeing up physical RAM. Instead of
letting Windows memory management grind your applications to a halt, you can
use FreeMem to specify an exact amount of RAM that you wish to free up. Before
freeing up the RAM, Windows will swap whatever is in that area of memory to its
swap file. Wasted RAM that is gobbled up by large applications, RAM that is
reserved for file caching, and large program libraries that are in memory are
allocated to the swap file, giving your current application more memory to use
and improving performance.<P>FreeMem runs in the background, freeing up a
set amount of RAM at regular intervals. A Taskbar icon lets you view memory
statistics at any time, and in low-memory conditions you can run an emergency
free-up.
Program
Location:
Programs\memory\freemempro\FreeMem Professional V4.exe
Rameter
1.0 (95/98) TRY IT!
This
extremely small program shows in tray bar dynamic icon with memory status
indicator.
Program
Location:
Programs\memory\rameter\Rameter.exe
Freemem
1.0 (95/98/NT) TRY IT!
Simply
a program to show the current available physical memory. It takes almost no
desktop space and uses only few resources.
Program
Location:
Programs\memory\freemem\Freemem.exe
Memory
Monitor 1.20 (95/98/NT) TRY IT!
Windows
95 and NT 4.0 applet for monitoring all aspects of Windows' memory usage. Gauge
in system tray provides visual feedback on overall memory load. Double-clicking
gauge expands into more detailed view.
Program
Location:
Programs\memory\memmonitor\setup.exe
Meg
97 3.0 (95/98/NT)
3-D
Graphs of your Memory and Disk usage. Multiple memory and disk utilities show
where memory and disk space are being used. Memory tree and Directory tree let
you see either overview or details of your system. Online ordering.
Program
Location:
Programs\memory\mega97\meg.exe
MemStat
1.0 (95/98)
A
desktop tray accessory which provides the user with a pop-up screen showing the
PC's current memory statistics. Has information for Physical, Virtual, and
Page-File sizes.
Program
Location:
Programs\memory\memstat\MemStat.exe
MemoryAnalyst
1.01 (95/98/NT)
Tracks
memory activity (physical and virtual). Displays a real-time graph.
Program
Location:
Programs\memory\memanalysis\MemoryAnalyst.exe
RAM
Refiner 2.0 (95/98/NT) TRY IT!
RAM
Refiner can monitor your system's memory in Windows 95, 98 and NT4.0. In
optional thirty second intervals, it will compact and defrag your RAM. It will
rest in the system tray. RAM Refiner is a must have utility for any system. Now
remembers your settings.
Program
Location:
Programs\memory\ramrefiner\setup.exe
CACHECHK
CACHECHK
will do memory accesses to check out the L1 and L2 cache, tell you the speeds
and sizes of each, and check to see if all of your memory is cached, or if some
is non-cached POSTCARD-WARE, not shareware or freeware CACHECTL allows you to
turn the L1 cache on or off, and tell you if it`s enabled or disabled
Program
Location:
Programs\CACHCHK6\CACHECTL.EXE
FMH-MemInfo
FMH-MemInfo
is a simple memory status viewer. VERY SMALL (only 9k), no unnecessary
overhead. Snaps to screen border, saves status, takes no unnecessary screen
space. Can even be run in taskbar tray area No-Nagged Shareware, $8 Freely
distributable 0.01 (C) FMH Computersystems
Program
Location:
Programs\MINFO001\MEMINFO.EXE
InfoByte
MemoryChecker
About
InfoByte MemoryChecker MemoryChecker help you to examine the
memory-requirements of any Windows-software. Just launch the software you want
to examine from MemoryChecker and run trough all functions in your software
MemoryChecker will keep track of how much memory your software uses Perfect for
Software developers Multimedia producers and many, many others For Windows
version 3.1, 3.11 and 95
Program
Location:
Programs\MC200UR\MC200UR.EXE
Memory
Monitor v1.01
Memory
Monitor v1.01 Copyright (c) 1996 Jason B. Franklin All Rights Reserved Memory
Monitor v1.01 - Monitors in realtime graphicaly the percentage of Total Memory
Load / Availible Physical Memory / Availible Virtual Memory. Shareware $10.00
Program
Location:
Programs\MEM_101\SETUP.EXE
MEMSPD
MEMSPD
will do memory accesses to drive the memory subsystem as fast as it can and
report the speeds measured
Program
Location:
Programs\MEMSPD1\MEMSPD.EXE
SHOWMEM
A
little utility thats shows what`s in a given mem position
Program
Location:
Programs\SHOWMEM\TROUBLES.EXE
HMVS
2.60 (95/98/NT)
Heuristic
Macro Virus Scanner for listing/disassembling of macros and detection/removing
of viral macros in documents from Word6/7, Word'97, Excel5/7 and Excel'97. It
is equipped also by neural network for reducing of false positive alarms.
Program
Location:
Programs\antivirus\hmvs\Hmvs.exe
Garrison
1.06 (95)
A
brand new front end for users of Dr Solomon's AVTK for Windows 95, giving you
easy visual access to all features of the AVTK and relieving you from use of
commandline options, in one window which allows you to quickly see everything
you need to see. Virus scanning and repair with FindVirus, integrity checking with
ViVerify, WinGuard, the Virus Encyclopedia and the Scedule Editor are all fully
supported and accessible with Garrison.
Program
Location:
Programs\antivirus\garrison\garrison106.exe
AntiGen
1.0 (95/98)
A
public service from Fresh Software to anyone concerned about the "Back
Orifice" trojan horse. AntiGen will detect, clean, and destroy the Back
Orifice trojan horse from your computer, automatically. AntiGen uses a wizard
interface and is very easy to use.
Program
Location:
Programs\antivirus\antigen\antigen.exe
McAfee
Scan for Win 95 3.19 (95)
The
most popular shareware virus scanner! Comes complete with ViruShield.
Program
Location:
Programs\antivirus\mcaffee\setup.exe
FIBER
Anti 1.20 (95/98)
A
comprehensive toolkit designed to protect, detect and recover your PC from the
computer viruses. While FIBER Anti Virus focuses heavily on numerous ways to
prevent a virus infection, the package would not be complete without various
cleaner programs to purge a system, in the unlikely event that a virus manages to slip through. The package
therefore consists of a number of programs each of which help you to prevent
viruses to do their destructive jobs.
Program
Location:
Programs\antivirus\fiber\favw122.exe
Bootminder
2.0 (95/98/NT)
A
simple and effective way of preventing boot virus infection. Bootminder will
warn you if a floppy is in your A: drive when closing down Windows. This way,
you won't start up with a possibly boot infected floppy.
Program
Location:
Programs\antivirus\bootminder\install.exe
ViruSafe
Web
ViruSafe
Web: Antivirus plug-in for browsers
Program
Location:
Programs\antivirus\vsweb\Vsweb40.exe
Port
Magic 1.00 (95/98/NT) TRY IT!
Will
monitor ports on your computer that you specify to watch for threatening
activity, including portscans. When such activity occurs, you are notified of
the exact time when it happened, and the IP and hostname of who tried to
compromise your system.
Program
Location:
Programs\netutils\port magic\pm100.exe
NukeNabber
2.9 (95/98/NT) TRY IT!
Sets
itself up to listen on TCP and UDP ports commonly attacked over the internet. A
total of 50 ports can be monitored simultaneously. ICMP dest_unreach attacks
are now logged. It is designed to give you the information you need in order to
trace an attacker including a method of finding an attacker's nickname on IRC
(mIRC, VIRC and PIRCH clients are supported).
Program
Location:
Programs\netutils\nuke nabber\nn29.exe
Castalia
Socket Tester 1.0 (95/98/NT) TRY IT!
Allows
for simple testing of socket based IP communications using a specific Port
number. It can be used both as a client, sending requests to a server; and as a
server, listening for client requests on a given port. It includes sample SMTP
and FTP instructions. A transmission log keep track of all of the data being
sent back and forth. The transmission log can be saved or printed from within
the application. For testing Socket based IP communications, the application
comes is very handy.
Program
Location:
Programs\netutils\castalia\socktest.exe
Local
IP 1.0.4 (95/98/NT)
A
small 32-bits application that shows you the local computer's Internet Protocol
(IP) address in decimal notation, your local hostname, and the local port. In
addition you can perform fast remote hostname to IP lookup.
Program
Location:
Programs\netutils\localip\Setup.exe
Whois
That 1.12 (95/98/NT) TRY IT!
Enhanced
WHOIS utility. Easily do domain lookups from a standard internet connection.
Full graphical interface makes it easy to find just the information you need.
Run it from Win 95 or NT, get your report(s) back VERY rapidly.
Program
Location:
Programs\netutils\whois\whois.exe
IP
Watcher'98 1.3(95/98)
With
this program you can monitor your current IP/hostname and it features a nice
user interface and the option to use skins, it features some useful function
which enables you to have full control over your IP/Hostname. It's UI was
created to make it has pleasant as possible to have on the desktop, it features
things such as Always on top, snap-to-edge and easy move to make it a joy to
have on the desktop.
Program
Location:
Programs\netutils\ipwatcher98\IpWatch.exe
IP
Pleasure 1.0.0 (95/98/NT) TRY IT!
A
multi featured Internet Protocol application that let's you perform: domain/ip
lookup, ping, finger, and display local information ++ A must have tool for all
internet users, and network administrators. It has a clean design and sits in
your system tray. All features are available trhough a popup menu.
Program
Location:
Programs\netutils\ippleasure\setup.exe
Syslog
Daemon 1.0 (95/98/NT) TRY IT!!!
Catches
and logs unix like Syslog messages. You can define filters based on strings or
IP-adresses and assign specific logfiles.
Program
Location:
Programs\netutils\syslogdaemon\sldaemon.exe
Internet
Maniac 1.1 (95/98/NT) TRY IT!
This
new version of the program comes with Install & Uninstall Support. It still
retains it's small size and fast execution speed. A new feature, ARP cache, was
added in this version that lets you check any computer's MAC address on your
local intranet. Other features include host lookup, ping, traceroute, POP3 mail
check, finger, whois, network time, port listener/scanner and speed check. This
program has an extremely simple user interface.
Program
Location:
Programs\netutils\internet maniac\maniac.exe
OstroSoft
Net Tools 2.00.18 (95/98/NT) TRY IT!
Scans
class C domain for specified port. Scans host for active port in specified port
range. Opens port with associated application. Resolves IP address to hostname
ping traceroute.
Program
Location:
Programs\netutils\ostrosoft\ostronet.exe
rPing
2.0 (95/98/NT) TRY IT!
A
Ping/Lookup/Traceroute/ utility for Win 95, Win98 & NT. It is
multithreaded, with an intuitive, easy-to-use user interface and fully
configurable by letting the user to customize settings such as packet size,
number of packet sent, interval time, data fragement,logging and etc.
Program
Location:
Programs\netutils\rping\rping.exe
NetInfo
2.2 (95/98/NT) TRY IT!
A
fully configurable and multithreaded program which provides tools for gathering
various information about a computer's current Internet connection. Designed
for non-programmers but sophisticated enough for power users, NetInfo is built
around a highly intuitive graphical user interface which takes full advantage
of Windows' point-and-click capabilities. NetInfo allows an Internet user to
perform the following tasks: examine the local host and Winsock data, ping a
remote host over the network, trace the route to a remote host over the
network, look up a domain name according to its IP address or an IP address
from its domain name, finger one or more users at a remote host, obtain
information on names from the Network Information Center, scan all hostnames
under one (class C) IP address and check host service status.
Program
Location:
Programs\netutils\netinfo\setup.exe
Ping
Plotter 2.01 (95/98/NT) TRY IT!
Fast,
small, and visual Ping/Trace Route utility. Uses multiple threads to trace all
hops at once for SUBSTANTIAL performance improvements over standard trace
routes. Does visual graphs of performance to pinpoint problems and see ranges
of responses and trends. Include any number of samples in the graph with sample
times of your choosing (1 second to many hours between samples). New version
2.00! Adds time-graphing, performance enhancements and long-term monitoring
tools to the already great 1.00 feature set.
Program
Location:
Programs\netutils\ping plotter\pngplt_2.exe
CyberKit
2.3 (95/98/NT) TRY IT!
With
a true Windows 95 'Find Files' look, CyberKit offers you the following
functions: Ping, TraceRoute, Finger, WhoIs, Name Server LookUp, Quote Of The
Day, Mail Notify and more!
Program
Location:
Programs\netutils\cyber kit\setup.exe
ISPSpeed98
build 2 (95/98/NT)
Determine
the REAL speed of your Internet Service Provider, showing you the actual speed
in bytes/second and the average in the last minute for outgoing and ingoing
data. Build2 introduce new settings that let the user presonalize the program's
layout.
Program
Location:
Programs\netutils\ispspeed\setup.exe
IP
Sniff 1.0 (95/98/NT) TRY IT!
A
great way to find unused or used IP address on a network, it will search a
range of IP's and report Active and InActive IP's within that range and create
a logfile from the results.
Program
Location:
Programs\netutils\ipsniff\ipsniff.exe
NetLab
1.3.7 (95/98/NT) TRY IT!
A
multithreaded Windows 95/NT Winsock compliant application that has the
following features: Finger service, WhoIs service, Ping, Traceroute,
"Parallel Trace" (new feature!), DayTime, PC's clock synchronization,
Quote of the day, DNS lookup, Port scan and more.
Program
Location:
Programs\netutils\netlab\install.exe
NET
IP Poster 2.0 (95/98/NT) TRY IT!
If
you want to run your own FTP or Web server and you have a dynamic IP, get NIPP.
It publishes your IP address into existing web pages on the internet. You can
create links that are automatically updated with your new IP. Next Version will
support DynDNS.
Program
Location:
Programs\netutils\net ip poster\nipp.exe
Simplehost
1.2 (95/98/NT) TRY IT!
This
program is for those of us that have had to look up a hostname to get the ip
address. Instead of pinging the server or whatever, simply enter the hostname
and it will return the ip address.
Program
Location:
Programs\netutils\simplehost\host.exe
Server/IP
Status 1.0 (95/98/NT) TRY IT!
This
utility will allow you to monitor 8 separate IP addresses and report status
with 10 second accuracy. Every 10 seconds, this utility will 'Ping' the IP
addresses that you have entered and if it is successful, you get a GREEN light,
if not, a RED light.
Program
Location:
Programs\netutils\serverstatus\sstat.exe
AboutTime
4.2 (95/98/NT)
Synchronize
your computer -- or your entire network! This program uses advanced techniques
and protocols to obtain 50 millisecond time accuracies on your PC. AboutTime is
both a time client and server, supporting the four most-used protocols,
including SNTP, a very advanced, accurate network time protocol.
Program
Location:
Programs\netutils\abouttime\AboutTime.exe
Net.Medic
1.2.2 (95/98/NT)
This
is one of the coolest utilities we have seen. It monitors EVERYTHING going on
with your internet connection in real time. Not like some programs that update
once every second or so, this shows as it happens. Requires a Pentium, and
shows you just how good your connection is. The best feature is its real time
update of throughput and compression you're getting.
Program
Location:
Programs\netutils\netmedic\nm.exe
exe
iSpeed
2.6.5 (95/98/NT) TRY IT!
Will
easily allow you to fine tune your TCP/IP parameters to maximize your throughput
for your dialup internet connections. iSpeed has builtin optimal configurations
that will set your configurations to those found to provide the greatest
throughput on a number of different systems at the click of a button. ISpeed
will automagically calculate the optimal values for certain settings based on
the values of other settings if desired. Now support Windows 95, 98 and NT 4.0
SP3.
Program
Location:
Programs\netutils\ispeed\Setup.exe
Nifty
Suite 1.999 (95/98/NT) TRY IT!
Fed
up with people nuking you, running into problems on a Windows network, or
accidently locked yourself out of Windows? Download Nifty Suite NOW!!! Nifty
Suite is a comprehensive and powerful collection of Windows tools that make
life easier! Features include Fast File Searches, Dynamic resolution changer
(similar to QuickRes), Can disable/enable Explorer, Network and general Windows
policies, eg. Start Menu options... Includes full Borland C++ source code.
Program
Location:
Programs\netutils\niftysuite\nsuite.exe
Socket
Test Bench 1.2 (95/98/NT) TRY IT!
Socket
Test Bench is a utility to test winsock-based communications.
Program
Location:
Programs\netutils\sockettest\STB12.exe
Logon
Scripting 1.0 (95/98/NT) TRY IT!
Creates
logon scripts for use on a Win95, WinNT, and/or Unix/Samba network. Comes
complete with help documentation and sample templates. Map network
drives/printers, merge registry keys, run remote applications and more! All
created fast and easy with an it's intuitive GUI.
Program
Location:
Programs\netutils\logon scripting\LogonScripting.exe
Switch
IP 1.0 (95/98/NT)
A
multiple TCP/IP configuration tool for mobile users. Allows you to save TCP/IP
settings and recall them. Now supports DNS, WINS, Workgroup, and NT Domain
Names and access to other MS TCP/IP files. (Only works with Microsofts TCP/IP)
Program
Location:
Programs\netutils\switchip\Setup.exe
Any
Speed version 1.1 for Windows 95
Any
Speed helps you to define the data transfer speed in a network With this
program you can measure the real transfer speed between Internet provider and
your computer and define the time when Internet speed is highest Also Any Speed
can measure speed of a local network or a CD ROM driver, and shows the results
in a graphical kind Any Speed puts the results in the trend file and can build
the trend chart of any day Any Speed allows you to connect to a Dial-Up Network
with much greater ease. It will automatically press connect for you on the
Connect To dialog box With AnySpeed you can run a programs when network speed
has some value. For instance it allows you to run Microsoft Exchange when
network connection is established
Program
Location:
Programs\ANYSPD\ANYSPEED.EXE
Net.Medic
1.2
NET.MEDIC
1.2 The Net.Medic getting started guide provides step-by-step instructions on
how to install and get started using Net.Medic. Although a manual is not
included in the download and bundled software, you can easily order one via
phone, mail, or fax. To order a manual separately, go to the VitalSigns Web
site and click on How To Buy. From there, you can order a manual by following
the supplied instructions on how to order by phone, fax, or mail The Net.Medic
product comes with an extensive online help system. To access the Net.Medic
online help system, simply choose Help from the Net.Medic Help menu or click on
the Help button (the ? button) in the Net.Medic toolbar. If you experience any
difficulty in installing or using Net.Medic, please visit the technical support
page at the VitalSigns Web site (www.vitalsigns.com). If the information that you
need is not on this Web page, then please check the Net.Medic online help
system. To access the Net.Medic online help system, simply choose Help from the
Net.Medic Help menu or click on the Help button (the ? button) in the Net.Medic
toolbar NEW FEATURES IN THIS RELEASE This section gives an overview of the new
features added to the Net.Medic product since the 1.0 release 1. Simplified and
Faster Installation Process The installation process has been significantly
simplified and the install time has been reduced 2. Support for Netscape
Communicator 4.0 and Microsoft Internet Explorer 4.0 Net.Medic now uses a new
mechanism for installing the hooks for monitoring browser activity. With this
new approach, these browsers are now supported 3. Improved Notify Capabilities
Four major improvements have been made to the Net.Medic e-mail Notify function
First, automated e-mail notification is now only available for chronic problems
or extremely severe warnings. This should help to minimize the possibility of
flooding webmasters, system administrators, and ISPs with e-mails about
intermittent problems. This, in turn, will enable them to focus on solving
chronic problems that plague their users Second, the text automatically
included in the e-mail notification now includes a larger number of variables.
In particular, IP and TCP errors are broken down into individual error
conditions. The use of modem and the connection rate are also reported. The ISP
entry and egress router addresses are included along with the actual server IP
address contacted by the browser Third, in order to help e-mail recipients
understand and interpret the contents of a Net.Medic e-mail, the e-mail
notification now includes an event number. This event number is a link to the
VitalSigns Web site. E-mail recipients can click on the link to open a Web page
that contains more detailed information about the specific problem reported by
the Net.Medic user Fourth, the ability to send Net.Medic e-mail notifications
using Extended Simple Mail Transfer Protocol (ESMTP) mail servers has been
added 4. Improved Modem Diagnostic Details Net.Medic`s e-mail notifications
related to modem problems now include additional diagnostic information. These
additional details can be helpful in determining the cause of the Net.Medic
user`s modem problems 5. Improved DNS Availability Reporting Net.Medic`s
ability to determine if a Domain Name System (DNS) server is available has been
improved 6. Revised Net.Medic`s Service Provider History Report This report now
includes targets that may be helpful in evaluating the quality of service
provided by your ISP 7. Local Database To Facilitate ISP Identification This
version improves the database of ISPs in the product to identify the ISP name
from many different ISP Point of Presence. It also handles many more ISP
exchange points 8. IP Address in Notify Mail Target The SMTP address in Notify
target can now be an IP address rather than a fully qualified domain name 9.
New Version Checking Capability Net.Medic now has the ability to check if there
is a new version of Net.Medic available for download. Net.Medic 1.2 will
automatically check the VitalSigns Web site once a month to determine if there
is a new version that should be downloaded 10. AOL Support Net.Medic 1.2
includes limited support for AOL while using Netscape Navigator or Internet
Explorer. A new category has been added to Net.Medic preferences-miscellaneous
that includes the ability to manually configure your AOL dial-up speed. Please
note that this should only be used if you are using AOL; dial-up speed is
normally detected automatically by Net.Medic This support is enabled by
entering the modem dial-up speed through the Net.Medic Preferences window. To
access this capability, choose Preferences from the Net.Medic View menu and
then click the Miscellaneous tab in the displayed Preferences window 11.
Revised Thresholds Several Net.Medic thresholds were revised to reflect the
feedback received during the Net.Medic 1.0 public beta. In particular, the
thresholds, which caused the IP and network error conditions to be reported to
system administrators and service providers, were revised 12. Enhancements to
the AutoCure Feature There were several improvements made to the Net.Medic
AutoCure feature. There is a new AutoCure control panel that contains a list of
previously cured AutoCures with the ability to undo or redo the cure 13. New
Filter For Hiding Low Severity Error Conditions You can now hide entries that
have a low severity. This enhances the ability to filter and view health log
messages in a Net.Medic report. To use this feature, choose Hide Low Severity
from the View menu in the Health Log window 14. CPU Load Monitoring The alarm
thresholds for CPU and memory usage performance conditions have been
significantly changed 15. Notify Against Slow SMTP Servers The timeout for
notification has been increased from 4 seconds to 60 seconds so that the
Net.Medic client can send e-mail notifications using SMTP servers that are slow
to respond. In addition, the e-mail notification has also been moved to a
separate thread
Program
Location:
Programs\NETMED\NETMEDIC.EXE
NetHelper
NetHelper
is a 32-bit Windows shareware application developed by Core Competence (c)
1997. NetHelper consists of an integrated set of desktop network diagnostic
tools which include Ping Verify basic
reachability Trace Route Discover the
route taken by packets Routes Display
the active routing table Connections
Display active TCP and UDP ports Statistics Display Ethernet,IP,TCP & UDP stats Hostname/Address Lookup Map
Hostname to/from IP Address
Program
Location:
Programs\NETHELP\SETUP.EXE
NetMon
1.1
NetMon
1.1 by Charles Turano Rajeev Mohammed
Program
Location:
Programs\NETMON\SETUP.EXE
PingGraph
PingGraph
1.0.0 for Windows 95 and NT PingGraph is a multi-threaded graphical TCP/IP
network monitoring and diagnostic tool. PingGraph can graph response time
within your Local Area Network (LAN) and keep an eye on the response time of
your favorite Internet multi-player game servers It can even monitor your
Internet Service Provider (ISP) to make sure you are getting the advertised
connection quality and stability for which you are paying
Program
Location:
Programs\PNGGRF\PINGGRAP.EXE
PINGRAPH
Graphical
TCP/IP network monitoring and diagnostic tool
Program
Location:
Programs\PINGRAPH\PINGRAPH.EXE
SYStem_CAPture
Utility Package
SYStem_CAPture
Utility Package This utility package is designed for technicians, systems
managers programmers or others who do setup, confiquration, maintainance, and
diagnostic type tasks on PC`s, especially in the field or remotely Utilities
included in this package allow a great deal of system information for a PC to
be captured quickly to disk files. The captured `image` can then be examined,
using other utilities in this package, at a time and place that is most
convenient.
Program
Location:
Programs\SYSCAP\CMOS.EXE
Cleanup
- Cookie Remover
Protect
your internet privacy and free up disk space. This software will remove all
internet cookies, cache, and history files for Internet Explorer, Netscape, or
AOL (already modified for browser versions 4.0). In addition to being privacy
software, this also removes some non internet files including the temp files
folder document links, and more
Program
Location:
Programs\CCLEAN20\CLEANUP.EXE
Hard Drive Utils
Catfish
(95/98/NT) TRY IT!
Save
snapshots of the dir/file structure of your disks, and instantly browse through
them at any time. These catalogs are very compact, and can easily deal with
huge directory trees on large disks or on CD-ROM software collections.
Program
Location:
Programs\hd\catfish\catfsh16.exe
EZ
Cat 2.0 (95/98/NT) TRY IT!
Easy,
simple explorer-like disk cataloguer for Windows 95/98/NT. Catalogues SyQuest,
Zip, network, hard, floppy, and CD drives - anything with a drive letter.
Browse, search, print the catalogue without the original disks.
Program
Location:
Programs\hd\ezcat\setup.exe
DiskFree
1.30 (95/98/NT)
A
handy popup utility to display free disk space for all drives connected to your
computer. Ideal to monitor disks which become frequently low in free space.
Highly configurable. Installs itself in the system tray.
Program
Location:
Programs\hd\diskfree\DiskFree.exe
TreeSize
1.44 (95/98/NT) TRY IT!
Every
hard disk is too small if you just wait long enough. Treesize tells you where
precious clusters have gone. From the context menu of a folder or drive,
TreeSize shows you the size of this folder, including all subfolders. You can
expand this folder in Explorer-like style and you will get the size of the
subfolders. It works like the UNIX-command "du" with a Windows
graphical user interface. Scanning is done in a thread and the wasted space can
be displayed. The results can be printed in a report.
Program
Location:
Programs\hd\treesize\treesize.exe
Disk-Mem
Panel 2.38 (95/98/NT) TRY IT!
A
very small panel that displays the free space remaining in your disks. It stays
on the top of the screen or minimized on the system tray. You can move the
panel anywhere on the screen. It refresh the display every 5 seconds. It also
can display the memory (Physical and Swap file) free and total in your system.
Program
Location:
Programs\hd\diskmem\diskmem.exe
XFolder
0.4 (95/98/NT) TRY IT!
A
useful freeware Windows95 utility that allows computer owners to analyze hard
disk folder sizes. With the help of this software you can locate easily where
large amounts of data are located on your hard disk. It is really easy to use
and it does not require much hard disk space.
Program
Location:
Programs\hd\xfolder\setup.exe
HardDisk
Space Monitor 98 1.98 (95/98/NT) TRY
IT!
Features:
Monitors your harddisk space, System Tray Application, Auto refresh, Auto
warning, User-defined refresh setting, HDD Unit Setting (Bytes, KB, MB, GB),
Display HardDisk Information (Label, File System, HDD type),HDD Tools, Cool
User Interface. Requires the MFC DLLs.
Program
Location:
Programs\sysinfo\hdmon\HardDisk98.exe
exe
Disk
Pie Charter 2.2 (95/98)
A
graphical disk explorer that shows disk usage per file and per directory in a
pie chart. You can zoom in and out on pie chart segments (directories). You can
also delete files and directory trees with it. Then it immediately shows the
effect on free disk space.
Program
Location:
Programs\hd\piechart\dskpie95.exe
Disk
Size 1.1 (95) TRY IT!
Small
freeware program for WIN 95. Shows drives used, free and total space in bytes,
Kb & Mb.
Program
Location:
Programs\hd\disksize\Disksize.exe
Zsoldos
Virtual Mem Monitor 1.90 (95/98/NT) TRY IT!
Monitors
the size of your Windows 95 or Windows NT swap file. Alerts you when file
exceeds specified size, keeps track of maximum size for trend analysis, can be
used in task bar so very little screen space is used. (Most functions still
available!) Monitors system up-time in days:hours:minutes:seconds. Complete
install and uninstall programs. Full help file throughly documents this
software.
Program
Location:
Programs\hd\zsoldos\setup.exe
flipTech
SwapMon 1.52 (95/98/NT) TRY IT!
Displays
and records Windows swapfile usage and helps you make intelligent decisions
about how much RAM you need. A built-in Swapfile Wizard provides optimal sizes
for permanent swapfiles and suggests how much additional RAM should be
purchased. A Virtual Cache Wizard allows users to limit the size of the
typically overgrown cache resulting in better performance.
Program
Location:
Programs\hd\fliptech\swp152.exe
Space
Explorer 5.0 (95/NT)
A
great file management system. It combines features usually found in several
different file utilities into one easy-to-use, multithreaded, multiple-document
environment providing information in lists (like Windows Explorer) and in
charts.
Program
Location:
Programs\hd\space explorer\setup.exe
Ontrack
Data Advisor 4.03a (95) TRY IT!
Diagnostic
software assesses the health of your hard drive and memory, identifying
potential problems that could lead to data loss. It is self-booting, so it is
able to run from a diskette even when your system cannot boot. It analyzes file
structures, evaluates drive capacity, checks boot sectors, reads the Master
Boot Record, cross-checks partition tables and CMOS, checks the system memory
for errors, and performs a thorough virus scan. The results of the tests are
saved to a text file. In the event that you have lost data due to a virus or
other software failure, Data Advisor can detect your modem and establish a point-to-point
connection with Ontrack's data recovery labs. Your diagnostic results are
uploaded and an engineer can begin performing Ontrack's patented Remote Data
Recovery process to retrieve your lost files.
Program
Location:
Programs\hd\ontrack\adv403a.exe
SpaceCon
1.0 (98)
Lets
you control the threshold level for the Windows 98 Low Disk Space warning
facility. It displays relevant information on all your fixed disk drives and
lets you modify the point (for each drive) at which Windows 98 gives its low disk
space warning.
Program
Location:
Programs\hd\spacecon\SpaceCon.exe
Disk
Analyzer 1.1 (95/98/NT) TRY IT!
A
useful FREEWARE Windows 95/98/NT utility that allows computer owners to analyze
disk space usage. It's easy to use and fast. With just a few clicks of your
mouse you can make analysis of the selected drive or directory. Program
provides flexible summary and sort functions so that the disk space usage
information is readily accessible in a variety of ways. Find and delete quickly
old, large files to recover disk space! New in v1.1: finds duplicate files; new
status window; right mouse click on any individual item in the summary window
opens MS Explorer with the selected directory.
Program
Location:
Programs\hd\disk analyzer\Disk.exe
DiskData
2.1 (95/98/NT) TRY IT!
A
compact explorer-like application that conveniently analyzes disk space
utilization. Selecting a disk volume or folder displays a summary of its
contents in report or chart format. Statistics include file/folder actual size,
allocated size, storage efficiency, storage slice, modification date,
attributes and version information.
Program
Location:
Programs\hd\diskdata\ddsetup.exe
SpaceMan
2.0 (95/98/NT) TRY IT!
A
FreeWare application that can be run from an ICON or as a shell extension (right-click
from Explorer) to display the amount of space used by files in a directory and
all child sub-directories. A real timesaver for getting statistics on those
deeply nested directories.
Program
Location:
Programs\hd\spaceman\setup.exe
Stats
97 1.0 (95/98) TRY IT!
Freeware
disk utility collects numerous disk statistics for Win95 including file types,
file ages, age distribution, and file size distribution. Works over multiple
disk drives. All graphs are 3D.
Program
Location:
Programs\hd\stats97\setup.exe
Spin
5.2.0 (95/98/NT) TRY IT!
Spin
stops removable media and hard drives from spinning down. It works with
Iomega's Jaz and Zip drives, Syquest drives, hard drives, and others.
Program
Location:
Programs\hd\spin\setup.exe
Drive
Emulator 1.4 (95) TRY IT!
Creates
a virtual drive for multi-purpose use. Eg. Copy an entire CD-Rom to your hard
disk and then create a virtual drive letter for it.
Program
Location:
Programs\hd\drive emulator\kcdemu.exe
Zipcat
Pro 3.0 Build 7 (95/98/NT) TRY IT!
A
32-bit application for Windows 95 with the look and feel of the Windows
Explorer, which catalogs fixed and removable media for offline browsing and
searching. It will catalog the contents of ZIP files and treat them as folders,
and even works with industry standard "descript.ion" files to
automatically add descriptions to files and folders on your media! The search
tool is powerful, and allows you to search by file/folder name and size,
create/modified/last access date, description, and more! Instantly copy items
from your disks to your hard drive without having to exit the program! Zipcat
Pro 3 will ask for the appropriate disk. Export your volumes for printing,
Email, or erases/spreadsheet programs. You can add descriptions to just about
everything, and delete individual items too. ZipCat Pro works with CDs,
floppies, removables, network shares, and more. If you can mount it, Zipcat Pro
3 can catalog it!
Program
Location:
Programs\hd\zipcat\zcp395.exe
Partition
Manager 2.37 (95/98/NT) TRY IT!
Partition
Manager - create, delete, resize partitions. Format and resize FAT-16 and
FAT-32 file systems. Advanced Boot Manager - select active partition at the
boot time, boot from the second hard drive. Hide/unhide partitions. Create up
to 31 primary partitions on a single hard drive. Detect boot viruses.
Program
Location:
Programs\hd\partition manager\install.bat
Anti
Power Management 1.0 (95/98/NT)
A
unique software package designed to prevent local and remote hard drive
spindown. Eliminate untimely drive spindown with APM 1.0 !
Program
Location:
Programs\hd\antipower\setup.exe
R
Tools 1.0 (95/98)
Contains
3 separate programs and has install and uninstall programing. (BACKUP) Backup
and restore the following files :Autoexec.bat, Config.sys, Command.com, IO.sys,
MSDOS.sys, Protocol.ini, System.da0, System.dat, System.ini, User.da0, User.dat
and Win.ini. (CLEAR) Clears out the files of the folders :cookies, :history,
:start menu documents, :temp, :temporary internet files, in C:\Windows.
(QUICKIE) A fast reboot that uses no memory or resources.
Program
Location:
Programs\hd\rtools\setup.exe
Disk
CleanUp 3.1 (95/98/NT)
A
small disk utility designed to clear previously deleted files. Deleting a file
will normally just remove the file's directory entry, but the data itself still
remains on the disk. CleanUp will completely eliminate the contents of your
deleted files. Disk CleanUp provides options to specify an NSA approved disk
erasure method and background execution priority. Disk CleanUp works with any
FAT16 or FAT32 hard drive, as well as MS Windows NTFS volumes. Disk CleanUp can
be configured to optionally place its program icon in the taskbar notification
tray.
Program
Location:
Programs\hd\disk cleanup\setup.exe
BINWRITE
Version 1.0.1 Beta 2 (95/98)
This
is raw write utility for boot image writing or dedicated os system etc. This
utility is useful for system develpor , static kernel designer on Windows 95
enviroment.
Program
Location:
Programs\hd\binwrite\BINWRITE.exe
ScanDisk
Manage 1.1 (95/98/NT)
With
ScanDisk Manager, you can avoid that time consuming BLUE screan after an
incorrect shutdown after the computer is restarted. ScanDisk Manager gives you
complete control over the enabling or disabling scandisk.
Program
Location:
Programs\hd\scandisk manager\ScanDiskMan.exe
noRemove
0.1.1a (95/98/NT)
A
simple utility which fools Windows 95 and Windows NT into thinking that your
removable drives (Zip drives, Jaz drives, magneto-optical drives, and the like)
are actually fixed hard drives. This can be useful since many programs will not
operate correctly with removable drives, including some versions of Matrox
installation utilities, DriveSpace, and many others.
Program
Location:
Programs\hd\noremove\setup.exe
Clean
Floppy 1.1 (95/98/NT) TRY IT!
Provides
a simple one click way to clean a messy floppy of all files and folders,
without having to format or manually delete it all yourself.
Program
Location:
Programs\hd\clean floppy\install.bat
Clear
1.0 (95/98)
A
simple program that CLEARS the files out of the folders: cookies, history, recent,
a.k.a. start menu documents,temp, temporary internet files, in Windows.
Program
Location:
Programs\hd\clear\clear.exe
Directory
Sorter for Windows 95 (95/98)
Norton
Utilities Dirsort users have been waiting for this one since the release of
Windows 95 ! A real Windows 95 Directory Sorting program. Sure... Explorer
displays files in any order you like. Sure... You can set the DOS DIR command
to display in any order you like. But when it comes to copying, zipping or
backing up files they are processed in directory order. Which means no order at
all ! At last a 32Bit Windows 95 program to sort all your files and
directories, and when we say that they are sorted, we mean it. Directory Sorter
rearranges the order of the file and directory names so that they are
physically stored in the order that YOU want. Great for backups, zip files,
CD-ROM production etc.
Program
Location:
Programs\hd\directory sorter\dirsort.exe
vRamDir
1.09 (95/98/NT) TRY IT!
A
dynamic 32-bit virtual RAM file system driver for Windows 95. It is to replace
RAM-disk and speed up hard-disk related operations. vRamDir is over 30 times
faster than hard-disks, 5 times faster than RAM-disks, and 2 times faster than
disk-cache. vRamDir also keeps hard-disks less fragmented, saves hard-disk wears
and tears, and saves battery power on notebook computers. vRamDir does not
pre-allocate any memory, and it has no practical limit on the amount of files
it can hold. No matter how much RAM your system has, vRamDir puts it into more
efficient use and speeds up the system. If the system has more than 32MB RAM,
vRamDir prevents the RAM from being wasted; if the system has less than 16MB
RAM, it is important to use vRamDir to increase system speed.
Program
Location:
Programs\hd\vramdir\install.bat
ErrorScan
2.5 (95/98/NT)
An
easy-to-use program which allows users to rid hard disks and removable drives
of error files and recover disk space. This translates to increased system
performance and reliability. Unlike traditional uninstall, remove, and
sweep-type programs, ErrorScan is a simple solution to a common, yet mostly
overlooked problem. Internet, e-mail, graphics/scanning software, database
programs, games, and in fact, most Windows applications create files to use as
a parking place for data. Unfortunately, due to lost Internet/Network
connections, system crashes, lock-ups, power failures, brownouts, and even
normal software installation and operation, these files are left behind in
error. Accumulation of error files can cause General Protection Faults and
Illegal Operation Errors as well as rob valuable disk space, slowing down the
system in the process. With one click, a user can recover megabytes, tens of
megabytes, even hundreds of megabytes of wasted space the first time ErrorScan
is run. With emphasis on safety, ErrorScan incorporates features to protect
from targeting files needed by the system or other programs (for example, .exe,
.com, .dll, .sys) as well as any files created during the current Windows
session. The Windows 95 and NT 4.0 versions give the ability to move files to
the Recycle Bin.
Program
Location:
Programs\hd\errorscan\Escan32.exe
DiskArella
(95/98)
Helps
you recover disk space that gets lost as time goes by and files begin to gather
on your hard drive. Based on your search criteria, DiskArella will search your
hard drive for unneeded files. Files meeting your criteria can then be
recycled, moved, or examined more closely. Other features: duplicate file
search, quick cleaning options (Internet cache folders, Windows Temp folder, etc.),
and drive statistics.
Program
Location:
Programs\hd\diskarella\setup.exe
Transfer
95/PE 2.09.23 (95/98)
Can
be used to either copy your hard drive to a new hard drive or as a backup.
Re-installation of Windows may take a day or longer, Transfer PE performs this
task in minutes. The source and target drives can be of different sizes
"Larger or Smaller", any cluster size. FAT16 to FAT32 conversions
without fear of data loss. Supports: IDE, EIDE, SCSI, JAZ, ZIP, SysQuest, and
more. Transfer PE is part of the Transfer series of programs.
Program
Location:
Programs\backup\transfer\transx95.exe
ImageCast
LE 1.0 (95) TRY IT!
The
first multicasting freeware drive imaging product for fast cloning of standalone and networked PCs.
Program
Location:
Programs\backup\image\LEclient.exe
Mr
Mirror 1.2 (95/98/NT) TRY IT!
Creates
mirror images of a selection of directories to a zip/jaz drive, a mapped
network drive or even a local hard disk. It keeps track of when and that it
does. It stores all its information on the volume that holds your mirror image.
Mr Mirror skips files that are already up to date. Mr Mirror features batch
mode and partial updates. Mr Mirror is 'Mailware', it is a full version, no
restrictions.
Program
Location:
Programs\backup\mirror\setup.exe
The
File Splitter 1.0 (95)
Splits
up large files on to multiple floppy disks, so that you can back up files that
are bigger than 1.44MB, or you can transer large files to other computers. The
program then recombines the floppy disks into a file on the hard drive.
Program
Location:
Programs\backup\splitter\setup.exe
CLEAN
SLATE
CLEAN
SLATE v1.0 - Resets a hard drive to an original, un-partitioned form Clean
Slate clears all the partitions on the selected hard drive, then reboots so the
new state of the hard drive is updated, and so you can install a new operating
system, etc If you choose to, Clean Slate will also save a backup of your
system areas, so that you can restore the hard drive for any reason A great
little utility for people who work with hard drives on a regular basis. It`s
quick, easy to use, and a big time saver. It`s also programmed by the author of
the STBFP utilities And it`s free for personal use! I hope you enjoy it
Program
Location:
Programs\SLATE10\TROUBLES.EXE
Advanced
Space Hunter
Advanced
Space Hunter The perfect companion to analyze your disks and save space
Graphical disk`s space analysis Duplicate, temporary, same name zero-size,
cluster space waste Try it free. New improved version
Program
Location:
Programs\ASH074\SETUP.EXE
Data
Digger 1.10 for Windows 95 (95)
Data
Digger is a simple utility that extracts data from corrupted data files that
cannot be opened by their source application
Program
Location:
Programs\DATDIG11\SETUP.EXE
Disk
Imager
The
Disk Imager is a DOS application that can create an image of a PC`s hard disk,
store it as a file on another device such as a second disk or network server,
and then restore that image to a PC with the exact same size and type of disk
Program
Location:
Programs\DSKIM102\IDEMO.EXE
DiskQwik
v1.1
DiskQwik
v1.1: Device Driver exclusively designed for AT/IDE Hard Disk Drives that
activates the drive`s MULTIPLE SECTOR BLOCK TRANSFER MODE. This little gem can
boost the drive`s Data Transfer Rate by 45% !! Package includes IDE Inquiry
util that tells if your drive has the built-in capability to use this mode and
an excellent DTR test to measure the results. Req: 286+CPU. Dustbowl Designs,
Inc Date 8/20/93) Shareware -AV
Program
Location:
Programs\DSKQWK\DBOWLDEM.EXE
Partit: The Partition Cluster Analyz
Partit:
The Partition Cluster Analyz~R analyzes your current files and provides you
with critical information to help evaluate how your hard disks might be
partitioned to minimize disk waste. Disk waste is created when a file is saved
(and, thus, allocated a disk cluster) but the file does not use all of the
cluster. Current and theoretical partition sizes are displayed for analysis
Program
Location:
Programs\PARTIT\SETUP.EXE
GRDUW
Disk Utility for Windows 95 V2.60
GRDUW
Disk Utility for Windows 95 V2.60 Windows 32bit Shareware (NOT run on Win/NT
Support for 720Kb, 1.2Mb, 1.44Mb, 1.72Mb and MS-DMF (1.68Mb) diskettes.
Duplicate and Compare diskettes. Save and Load Diskette binary images. Boot
sector check and recreate. Optimized disk Format and Verify Detailed disk
information. Hard Disk/Diskette Repair capability. Completely integrated with
the explorer. 40US
Program
Location:
Programs\GRDUW\GRDUW.EXE
HARD
DISK COPY v3.1 (95/98)
HARD
DISK COPY v3.1 : Hard disk sector copy backup utility. Ideal for Win95 backup
or duplicating same configuration on multiple systems. Very fast. Has fast mode
that copy only the portion of HD with active data Backup to and restore from
image files Command line or menu driven. Mouse support
Program
Location:
Programs\HDCP31\HDCP.EXE
Hard
Disk Sleeper for Windows 95 V 1.43
Hard
Disk Sleeper for Windows 95 V 1.43 Copyright (c) 1995-97 by M. Wolf With
HDSleep you can control the Power Management of your IDE- and EIDE harddisk
drives even if your Computer-BIOS does not support Power Management You are
able to define suspend times for one or all drives and you can
activate/deactivate the PM just with a mouse click HDSleep works with IDE- and
EIDE-compatible drives only. SCSI drives are not supported Language: Multi
(English/German
Program
Location:
Programs\HDSLEEP\HDSLEEP.EXE
Hard
Disk Usage & File Size Monitor
Hard
Disk Usage & File Size Monitor & Analyzer Utility
Program
Location:
Programs\DISKT14B\DISKT14B.EXE
HD95COPY
und FAT32CP (95)
HD95COPY
is a program to backup and restore FAT16 partitions FAT32CP is a program to
backup and restore FAT32 partitions of MS Windows 95 (OSR2
Program
Location:
Programs\FAT32CP\FAT32CP.EXE
IDE-ATA
Drive Identification Program v2.60
This
program was designed to get a lot useful info from ATA standard feature - Drive
Identify (Note it works also for most ESDI drives But many good features were
added over last years of development
Program
Location:
Programs\IDEATA26\IDE-ATA.EXE
RDD Monitor
Real
Disc Drive Monitoring System
Program
Location:
Programs\RDDMON\TROUBLES.EXE
Revival
(95/98)
Revival
can repair file system that is totally destroyed The following is the some
example that Revival can repair 1. If your hard disk is infected with virus,
and then lost all the information at the partition table, the boot sector, the
FAT, and the root directory 2. When you accidentally formatted your hard disk
3. For some reason(eg, when Windows 95 is unstable), you format the hard disk
then reinstall Windows 95. But when you found you didn`t back up all the necessary
files before doing this, Revival can help you revive the files easily provided
that they remains somewhere in the hard disk 4. If you delete the directory
including sub-directories and you make file or other directories in that space
of hard disk, you will make a lot of efforts to recover the former data. In
this case, "Undelete" or "Unerase" does not give you
satisfied job. Only Revival can save you and your files 5. When you are doing
some jobs like booting or saving data, you sometimes face the cases that your
working directory suddenly disappeared and filled with strange data Even though
there are many anti-virus programs and file system repair utilities , the
programs cannot repair totally damaged disk in the root directory and the FAT.
They just trace the partition table and the boot record and repair only
partially damaged file system Revival can search data area of disk and repair
lost files in the totally damaged file system
Program
Location:
Programs\REVIVAL\REVIVAL.EXE
STBFP
v2.0
STBFP
v2.0 - Three utilities that save the boot sector, FAT, and partition STBFP
allows you to save and restore images of your critical disk areas. It also has
a compare function that allows you to check if the saved data you have is equal
to the current boot sector or partition(MBR These utilities are useful for
restoring a disk or hard drive when it has been damaged by an accident or
virus, or if a system crash damages any of these areas Version 2.0 fixes a few
bugs, and adds many new features, designed to make the utilities more versatile
and easier to use, as well as many other improvements And it`s free for
personal use I hope you enjoy the utilities
Program
Location:
Programs\STBFP20\TROUBLES.EXE
WDTBLCHK
This
program reports the number of drives physically detected the number of drives
defined by the BIOS, and the characteristics of the drive parameter table for
each drive detected This program was written for OEMs and end users. OEMs can
use this program to verify BIOS drive parameter table compatibility for supporting
IDE drives greater than 528 MB. End users can use this program to report drive
configuration information to Western Digital Technical Support personnel over
the phone when discussing disk drive related issues
Program
Location:
Programs\FSTDRV\EZ.EXE
WINIMAGE-2.50
WINIMAGE-2.50<ASP>THE
WINDOWS DMF DISK IMAGER FIXES SOMES DMF problem under w95, win95 look Open
CDROM ISO image file in read only This .ZIP:Win16 (Win 3.1) & Win32
(WinNT-x86 Win95,32s),5 langages. New:ListView,tabb. dlg boxes for option. CAN
READ/WRITE/FORMAT DMF under WinNT 3.5,!WIN95!, Win3.1. support LFN Contain both
Win 3.1 and WinNT Intel version make disk image from floppy, extract file from
image, make an empty image, inject file on it and put the image on blank disk.
TRUE WINDOWS APP (modern intrface).Change image format,dfrg delete file on
image. POWERFUL BATCH ASSISTANT
Program
Location:
Programs\WINIMA25\WINIMAGE.EXE
MegaSweep
for Windows 1.09 (95/98/NT) TRY IT!
A
FREEWARE Windows 95/98/NT utility that allows you to delete unwanted files from
your entire workstation or server file system. With MegaSweep, you can easily
create profiles for files you want to delete from a directory, folder, drive or
computer across the network. Each profile defines a start location, file
specifications, and the option to delete files based on creation date.
Program
Location:
Programs\fileutils\megasweep\setup.exe
Renamer2
build 0030 (95/98) TRY IT!
Sick
of Windows 95 using '.' in filenames, screwing up your attributes? Renamer2
renames file attributes to their normal state if Windows used the '.' in a
filename. Handy Windows App. used instead of having to go through DOS.
Program
Location:
Programs\fileutils\Renamer2\r2b0030.exe
The
Rename 1.4 (95/98/NT) TRY IT!
This
program allow you to rename simply and quickly files with many options. You can
add counters (in decimal, hexadecimal and octal), search and replace text,
replace prefix with file's content, convert names to upper or lower cases,
invert letters, invert cases, replace name with system date and time or with
file's time and date. Program support long file names. You can act separatly on
prefix and extension. You can call the program from Windows's Explorer and make
drag and drop with it. Keep trace of your favorites directories. You can rename
or copy files. Possibility to undo last operation. Create also batch file to
rename files (also available for undo). Inline help available. Requires the VB
5.0 Runtimes.
Program
Location:
Programs\fileutils\therename\setup.exe
Rename
Files 1.2 (95/98/NT) TRY IT!
A
very easy to use program that renames many files in a folder and give them the
same name with increasing numbers (it holds the extension of the original
file). The ideal solution to rename many images.
Program
Location:
Programs\fileutils\renameProgram Location: Programs\renmfl.exe
Recover4all
0.21 (95)
With
this utility you can easily undelete files under Windows 95. If you have
emptied the recycle bin and want your files back, you can use this program to
recover them. Files in deleted folders can also be recovered.
Program
Location:
Programs\fileutils\recover4all\r4a.exe
Mass
Rename 1.1 (95/98/NT) TRY IT!
A
utility that allows you to rename groups of files into a series. For example,
perhaps you have a group of 50 .GIF files that have different names, and you
want to use them on your web page. You can rename them to WebGraphic01.GIF
...... WebGraphic50.GIF, or MyPic01.GIF ...... MyPic50.GIF with a single click!
Good for renaming any type of file at all into a series! Sounds, Graphic files,
HTML pages, or whatever you can think of!
Program
Location:
Programs\fileutils\massrename\setup.exe
File
Date Changer 1.61 (95/98/NT) TRY IT!
File
Date Changer 1.61 - A Windows-Program which changes the Date/Time of Files.
Good Tool i.e. for Application-Developers. A 32-bit .EXE for Win95 which
supports long filenames, and a 16-bit .EXE for Windows 3.1 are included. Now
with Drag & Drop function to choose single files.
Program
Location:
Programs\fileutils\datechanger\Fdatch32.exe
CCS
Dir/File Compare Util 4.98.100 (95/98/NT) TRY IT!
Allows
you to take a snapshot of all files and subdirectories for a specified
directory and store that information in a file. You may then load that info
back in after you have installed new software or updated a program and compare
it to the same directory. Program will show which files have been deleted,
added, or modified since you last stored the dir/file information. Complete
with Install and uninstall program.
Program
Location:
Programs\fileutils\ccscompare\setup.exe
WinHex
7.1 (95/98/NT)
A
hexadecimal editor with a lot of functions: Concatenate, split, compare,
convert and analyze files; particularly flexible search and replace functions;
automation of file editing; disk editor (only for Windows 95); import all
clipboard formats; character tables; random number generator; print.
Program
Location:
Programs\fileutils\winhex\setup.exe
Chgname
6.1 (95/98/NT) TRY IT!
A
fast, comprehensive and very flexible file management tool, which changes the
NAMES, all DATES, all TIMES and ATTRIBUTES of up to 32767 files. The main task
for Chgname is to enumerate large number of files with similar names (like
name001.ext, name002.ext). Chgname also changes CHARACTER CASE of file names
for easy transportation between operating systems. Further, Chgname is made
very flexible by a wildcard system and many other options for composing file
names. In addition lists of filenames may be edited like text files for fast
and efficient editing for all kinds of filenames. Chgname even has the capacity
to set all file date- and time stamps progressively (created, modified,
accessed). Files are imported into a file list through an open dialogue box,
drag-and-drop form the Explorer, through a search function which includes
searching through subdirectories or through the command-line. Command-line
parameters provide the means for full automation. The files are either moved
into one directory, left where they are or copied into one single directory.
Chgname is ideal for everyone who have demanding tasks which includes keeping
order in large number of for example data files.
Program
Location:
Programs\fileutils\chgname\ChgInst.exe
Execute-File
Locker 1.1 (95/98) TRY IT!
This
is a file locker, it can help you to lock *.exe and *.com file. It's useful for
your windows!
Program
Location:
Programs\fileutils\filelocker\Flock.exe
FxEdit
2.8 (95/98/NT)
A
small file utility that allows you to view and modify binary files.You can
search for specified hexadecimal and ASCII strings. Most commonly used menu
commands are available on the application's toolbar ribbon. File Editor can be
configured to optionally place its program icon in the taskbar notification
tray.
Program
Location:
Programs\fileutils\fxedit\setup.exe
EXTEditor
1.0 (95/98) TRY IT!
A
simple program designed to easily edit, modify and create new extensions or add
new actions to current existing extensions, but only under Windows 95. Worried
because your favourite image viewer doesn't get started when you double click a
JPG image? You'll have no more problems! With some mouse clicks and EXTEditor
this problem will be solved in a few seconds.
Program
Location:
Programs\fileutils\exteditor\ExtEdit.exe
UFC32
2.02 (95/98/NT)
This
cute little program allows you to compare two directory trees byte by byte. Any
differences found are reported both in the message window and, if you like, in
a report file. This can be very handy to check your self-made backup CD. Lots
of options for comparison.
Program
Location:
Programs\fileutils\ufc32\ufc32.exe
WinAttrib
1.00.71114 (95/98/NT) TRY IT!
A
simple, easy to use program which will allow you to change the attributes of
multiple files quickly. It supports wildcards and changing attributes of files
in subdirectories recursively.
Program
Location:
Programs\fileutils\winattrib\WinAttrib.exe
Version
Manager 1.02 (95/98/NT)
Application
to easily browse the "hidden" version information in executables,
DLLs, OCXs, etc. Ever wonder where mystery.dll came from, or if it's safe to
delete? Are you a system administrator that requires detailed audits of every
file that gets installed? Version Manager can help! Has an easy to use
Explorer-like interface. The registered version allows exporting to a .CSV
file.
Program
Location:
Programs\fileutils\versionmanager\vermgr.exe
Visual
Merge 1.30a (95/98/NT)
Designed
to help you combine two files or directories. It displays the contents of two
files in a double-pane window and lets you pick between the differing segments
and then save the merged file under a new name. Features include directory
comparison, line numbering, a position bar, an auto-walk mode, and file
navigation. VMerge can save you time by reducing tedious manual processing. The
program can be run under Windows NT, Windows 95, or Windows 3.1. Among what's
new in this update: Directory comparison, drag-and-drop support, and a toolbar
(in the 32-bit edition).
Program
Location:
Programs\fileutils\visualmerge\setup.exe
Directory
Snoop 1.0 (95/98) TRY IT!
View
raw dir entries. Displays erased file names from your Windows 95 system. Purge
the file names left behind after deleting files. View raw file clusters to
confirm your file wiping program is working as advertised. Works only on Win95
(not NT) systems with FAT12 and FAT16 formatted hard drives and floppy disks.
Program
Location:
Programs\fileutils\dirsnoop\ds95.exe
WinUtils
1.0 (95/98/NT) TRY IT!
Made
up of four seperate programs, WinCopy, WinMove, WinDel, and WinRen. These
programs work like their DOS counter-parts but use the same Windows 95 API
function that the Windows Explorer uses. Therefore you can get the same
progress Windows and the same undo options.
Program
Location:
Programs\fileutils\winutils\setup.exe
ListMaker
2.0 (95/98/NT) TRY IT!
Really
easy to use, generates customizable text or HTML lists of your files. Can
catalog removable disks, search for files and tell you what disk they are on,
search for duplicates in your list, and generate lists automatically to keep
them up to date. Give it a try!
Program
Location:
Programs\fileutil\listmaker\setup.exe
Discomania
1.3 (95) TRY IT!
Redesigned
with many new improvements. Create catalogs of your removable, cdrom, and local
drives (options include, file filters and exclusion of sub-directories).Search
catalogs-by any reference (exact match or match case)-by file extension-by
date. View/delete/print(print preview) catalogs. Copy, open. Small and fast.
Program
Location:
Programs\fileutils\discomania\Discomania.exe
FolderSort
1.0 (95/98/NT) TRY IT!
Free
file sorting utility to sort files in a folder in one of four ways - by name,
by name (reversed), by extension and by extension (reversed). For when you
really need files physically sorted in a folder, and don't want to pay money
for such a simple task.
Program
Location:
Programs\fileutils\foldersort\FolderSort.exe
MacroCopy
3.13 (95/98/NT) TRY IT!
The
file copying utility with some advanced features. It allows to split files
automatically while copying it, when disk becomes full and allows to continue
copying to another disk. And it also allows to merge files, restoring original
file. It is useful while copying long files to small media.
Program
Location:
Programs\fileutils\macrocopy\Mc.exe
Visual
Split Studio 98 5.11 (95/98/NT)
THE
best file splitting technology has been updated! Visual Split Studio now comes
with a Split Wizard and also Explorer right click extensions for instant and
powerful self uniting splits and unites. Of course, use the Studio when you
want to 100% fine tune the way your files are split - from specifying precise
file namings and sizings to executing programs upon self unites.
Program
Location:
Programs\fileutils\visualsplit\m511vss98.exe
Speed
Split 1.00 (95/98/NT) TRY IT!
File
Splitting Utilities. Very fast file split engine also work with very large
files. Plus SELF EXTRACT File.
Program
Location:
Programs\fileutils\speedsplit\sssetup.exe
File
Copy 1.02 (95/98/NT) TRY IT!
Lets
you to copy your files, split them when copying to a small media (for example,
1.44 MB disks), and then merge.
Program
Location:
Programs\fileutils\filecopy\fcopy.exe
Chainsaw
1.3 (95/98/NT) TRY IT!
Split
files into smaller ones. Very simple drag and drop interface. Creates .bat file
to put parts together again.
Program
Location:
Programs\fileutils\chainsaw\Chainsaw.exe
File
Shredder 3.0 (95/98/NT) TRY IT!
A
program to split a large file into smaller files. You can later combine files
together in any PCs without installing any programs - not even File Shredder.
Program
Location:
Programs\fileutils\fileshredder\setup.exe
CompSoftware
Diff 2.0 (95/98/NT) TRY IT!
A
free visual file difference analysis tool for Windows 95/NT. Use it to analyze
what have changed between two revisions of the same file or folder. CSDiff is
usually used to analyze program source files, HTML documents and MS-Word
documents.
Program
Location:
Programs\fileutils\csdiff\csdiff.exe
Syncer!
1.1 (95/98/NT) TRY IT!
A
handy little utility for synchronizing the contents of two directories. After
selecting two directories, simply press the synchronize button and Syncer!
performs automatic 2-way synchronization.
Program
Location:
Programs\fileutils\syncer\Syncer!.exe
CHANGE
TRACKER
CHANGE
TRACKER
Program
Location:
Programs\CTRACKER\CTRACKER.EXE
CHKFILES
The
program CHKFILES.EXE is a completely self-contained program. You can run it
from the floppy disk or copy it to your hard drive and run it from there
Program
Location:
Programs\CF14-32\CHKFILES.EXE
Clean
System Directory - v1.5
Clean
System Directory - v1.5 This program scans your system looking for all
references to DLL files in your Windows system directory. Those DLL files in
the system directory that have no programs calling on them can be moved out of
the system directory, saving disk space and improving system performance. For
experienced users. Win 3.1 & Win 95
Program
Location:
Programs\CLNSYS15\CLNSYS.EXE
CloneMaster
CloneMaster
is the first truly intelligent and accurate duplicate file finder. It sniffs
out duplicate files--and not just those with the same name. Clone Master can
locate all files with identical content, regardless of filename, date, time,
size, or location. You can choose the drives to scan--even network drives--and
specify zero length, duplicate, and/or same name files. The results of your
search appear in the main selection window, and Clone Master displays
additional windows showing zero length files, along with tree views of
duplicate and same name files, depending on your search parameters. You can
then select files to delete, automatically sending them to the recycle bin,
where they can be undeleted should you change your mind. Smart Delete, a
special feature that makes recommendations for deletions, makes the process
even easier
Program
Location:
Programs\CLONMR\CLONEMAS.EXE
ComparEx
ComparEx
detects system changes during installation and starts of a program. It
optionally logs changes in the registry, win.ini system.ini, config.sys,
autoexec.bat, the windows and windows system directory, in an `internet`
directory collection and in an additional user definable directory collection,
optionally with subdirectories The `program` may also be an internet browser
session. So sent cookies and other files the user got during the session can be
detected This prevents from uncontrolled getting viruses and other unwanted
data ComparEx is helpful for a complete uninstall of the program (most
uninstallers let remain fragments of security, time limitation etc in the
registry or the windows directories), or just to see `What happens with my
system Changed data in registry and .ini files can be deleted, rolled back
edited and rewritten using an built-in editor Results can be stored in files
for later use or sent to a line printer with various print options to hold the
output small and print just the results one wants to see.
Program
Location:
Programs\CMPEX141\SETUP.EXE
DELTA
3.1
Delta
allows you to save information about your disk and then compare the differences
that may have occured over time. A typical application would involve Windows
installation software, where you would save your disk`s information before and
after the installation, and then compare and check for differences. Delta also
allows you to save information contained in any text and Windows initialization
files and then check for differences. Typical files would include:
AUTOEXEC.BAT, CONFIG.SYS, WIN.INI, SYSTEM.INI, etc. Delta also allows you to
automatically "uninstall" software. Other uses would include simply
monitoring changes to your drive or network over time As an extra bonus,
included is a program called RESTART. This program restarts Windows when you double
click on it
Program
Location:
Programs\DELTA\INSTALL.EXE
DLL
Master 4.2
DLL
Master 4.2 lists modules in MS Windows 95 or Windows NT memory, with src path
and filestats. Load, unload, decrement DLL use count. Multiple lists, compare
print, save, restore. Version and header info
Program
Location:
Programs\DLLMS420\SETUP.EXE
DupFileFinder
No
more "Insufficient Disk Space" messages and Hair losses This software
will help you to find all the duplicate files in your disk That is, it will
list all the files that have a duplicate copy This helps you to easily delete
all the unwanted files and thus to gain more disk space Another facility in
this software is to collect and display the Disk/File statistics. It is very
powerful in that they can total up the cumulative file sizes, file ages, and
usage times of each file on the hard disk. All graphs are very easy to read and
in 3D It also shows the time statistic of the files. ie, a graph showing the
time each file was created or modified Duplicates can be identified by several
different criteria 1) Name only 2) Name and size 3) Name, size and modified
date/time 4) Size only 5) Size and modified date/time 6) Size and type 7) Type
and modified date/time Once the duplicates are identified you can view each
pair of duplicates on a split screen comparing dates, times, attributes, sizes
and even the file contents
Program
Location:
Programs\DUPLICAT\DUPFILEF.EXE
DUPFINDR
Find
and remove duplicated files
Program
Location:
Programs\DUPFINDR\DUPFINDR.EXE
Link
Check
Link
Check verifies links between executable files and modules (DLLs). Useful for
analyzing those "Cannot find (filename) or one of its components" and
"Call to Undefined Dynalink" system error msgs. View Version info on
all modules. Check modules loaded in RAM as well as RAM details. Analyze
function calls inside DLLs and others. VB and ODBC support is also included.
v5.7 for Win 95
Program
Location:
Programs\WLCHK955\WLCHK95.EXE
SnapShot
v1.2
SnapShot
v1.2 The function of this program is to allow the user to monitor any changes
to the WINDOWS and WINDOWS\SYSTEM directories The VB4 Runtime Module,
VB40032.DLL, is required to run this program Shareware $10.00 U.S Ron Parker
(CT Software) ron2222@aol.com
Program
Location:
Programs\SNPSHT\SETUP.EXE
Catfish
(95/98/NT) TRY IT!
Save
snapshots of the dir/file structure of your disks, and instantly browse through
them at any time. These catalogs are very compact, and can easily deal with
huge directory trees on large disks or on CD-ROM software collections.
Program
Location:
Programs\hd\catfish\catfsh16.exe
EZ
Cat 2.0 (95/98/NT) TRY IT!
Easy,
simple explorer-like disk cataloguer for Windows 95/98/NT. Catalogues SyQuest,
Zip, network, hard, floppy, and CD drives - anything with a drive letter.
Browse, search, print the catalogue without the original disks.
Program
Location:
Programs\hd\ezcat\setup.exe
Reboot
1.2 (95/98/NT)
This
program reboot Windows 95 / NT in 10 sec until 4 hours. EASY to use. You can
Logoff, Poweroff, Reboot and Shutdown.
Program
Location:
Programs\misc\reboot\setup.exe
exe
The
Big Red Button 1.0 (95/98/NT) TRY IT!
Runs
in Windows95 system tray. A red button appears there. When you double click on
the button it clears your documents history. It basically lets you easily cover
your tracks without going to the normail trouble of clearing your documents
history.
Program
Location:
Programs\misc\bigred\tbrb.exe
WinImage
Professional 4.0 (95/98/NT)
A
powerful disk utility that enables users to make a disk image from a floppy,
extract files from image, make an empty image, put the image on blank disk,
etc... WinImage also supports many different standard and non-standard formats,
including Microsoft's new DMF format.
Program
Location:
Programs\misc\winimage\Winimage.exe
Duplication
Factory 1.51 (95/98/NT)
A
complete diskette duplication and cataloging solution for Windows 95 and
Windows NT. By creating an "image" of the source disk and storing it
on your hard drive, you'll be able to create exact duplicates in record time.
Data verification detects problems immediately, preventing you from sending out
bad disks.
Program
Location:
Programs\misc\dupefact\setup.exe
CDCOPY
3.708 (95/98/NT)
Copyint
CDDA to disk using ASPI interface (Windows-95 /NT) for SCSI CDROM/DCR orgeneric
WIN32 interface (Windows-NT) for all CDROM/CDR.
Program
Location:
Programs\misc\cdcopy\Cdcopy.exe
DiskSpan2
2.0 (95/98) TRY IT!
A
simple utility that adds a choice to your SendTo menu allowing you to
automatically compress, copy, and span file(s) across multiple disks with ease.
It uses regular inhouse zip compression. When you open the SpAn file, DiskSpan
resotres your files quickly. Great for sharing or storing large files.
Program
Location:
Programs\backup\diskspan\setup.exe
QuickZip
Backup 2.1 (95) TRY IT!
Replicates
an entire directory structure, then compresses all files in each directory
using standard ZIP compression. It is ideal for backing up to Zip disks.
Program
Location:
Programs\backup\quickzip\qzbsetup.exe
CacheMan
Cacheman
helps you improve system performance by reducing swap file usage. Have you ever
wondered as to why some of your programs run so slowly? It could be caused by
the disk cache management of Windows 95. It takes up almost all of the
available physical memory. When the system runs out of RAM, Windows starts to
use virtual memory instead of flushing the disk caches. To change this
behavior, use Cacheman's interface to adjust the maximum and minimum cache
size. Cacheman will then write the proper values to the Windows SYSTEM.INI
file. The result is a much better system performance on most systems, due to
the reduced swap file usage.
Program
Location:
Programs\misc\cacheman\Cacheman.exe
Clear
Documents 1.0 (95) TRY IT!
Tiny
program that resides in your system tray. At the click of a mouse, POOF! Your
Documents history is gone. Requires the VB 5.0 Runtimes.
Program
Location:
Programs\misc\cleardocs\clear.exe
Anonymous
Email Mail v3.0
Anonymous
Email Mail v3.0
Program
Location:
Programs\ANMAIL\SETUP.EXE
BinPatch
Software
package to generate and apply patches. Ported and compatible for DOS Win95, NT,
OS/2 and Linux.
Program
Location:
Programs\BP_E104D\DOPATCH.EXE
Boot
Log Analyser
Looks
at your Windows95 BOOTLOG.TXT file and calculates the time taken to load each
driver etc, in order to help in locating any cause of lengthy boot-up times
Program
Location:
Programs\BLA\BLA.EXE
DeskView32
v1.1
DeskView32
v1.1, Win95 desktop viewer Icon sits in system tray, click to show pop-up menu
with all files and shortcuts on your desktop, without having to minimize all
your apps to see the desktop. Galt Technology 1996 http://www.galttech.com
Program
Location:
Programs\DESKV32\SETUP.EXE
Dustman
Dustman
Program
Location:
Programs\DUSTMN\DUSTMAN.EXE
KrTime
This
program is designed to correct system clocks that goes to fast or to slow. The
programmer takes no responsibility what so ever, for damage, loss of
information or any other thing that can occur as a result of using KrTime or
the files distributed together with KrTime, on any computer, or computer
equipment, or equipment associated with a computer
Program
Location:
Programs\KRTI101\TROUBLES.EXE
Garbage
Can
Garbage
Can (07/97) for Windows 95 & 3.1 A secure file delete program guaranteed to
make a deleted file, completely unrecoverable. Includes routines that process
the `Slack Area associated with a file.
Program
Location:
Programs\GC0797\GC_WIN31\CAN16.EXE
GOOD
RIDDANCE
GOOD
RIDDANCE is a convenient, easy-to-use, and FREE file deletion utility. Use it
to quickly clear the contents of various folders on your hard drive, such as
the caches which contain files downloaded during Internet sessions (these files
can number in the hundreds or thousands and can occupy a lot of disk space).
Deletion Sets may be defined -- these are simply groups of folders which are to
be cleared. Select a deletion set, and clear its contents at the press of a
button (the folders are retained, the files in them are deleted). Folders on
your drives are displayed in a tree list, and are color-coded red, green, or
blue. Green folders can be cleared, red ones cannot be (they may be changed to
green in the future), and blue folders cannot be cleared (they cannot be
changed to green). Two opportunities to abort the file deletion process when
clearing folders are given, and the files which will be deleted may be
displayed before the deletion occurs. The user may also specify a list of file
extensions , and files which use those extensions will not be deleted during
the folder clearing process.
Program
Location:
Programs\GOODRID1\GOODRID.EXE
LITCAB
LITCAB
- Version 1.11 Read Microsoft CAB setup files Select and extract compressed
files included in the CAB files and in auto-executable CAB files Operates under
Windows 3.1 and Windows 95
Program
Location:
Programs\LITCAB11\LITCAB.EXE
MegaLoad
2.0
The
program generates under windows95 a number of independent loads (programs). The
loads mainly allocate, test and free memory (adjustable The aim is to test the
system stability On my computer soon errors occured, although I have never
problems under windows311 and only a rare few problems under win95
Program
Location:
Programs\32ML2\SETUP.EXE
Microsoft
Windows 95 Power Toys
Microsoft
Windows 95 Power Toys PowerToys -- UI enhancements for advanced Windows 95
users that can easily be installed on Windows 95 These enhancements were
developed by members of the Microsoft Win95 team, and are now being made
available to Win95 users at no cost. NOTE: these are not part of any shipping
retail product at this point in time, and therefore are not supported through
any official support channels. Use "at your own risk". (See official
disclaimer below The contents of this folder will be updated over time as we
make enhancements to the utilities you see here now, and as we add new
utilities for people to try out. Stop back every now and then and see what`s
changed Here`s what`s available now TapiTNA(telephony taskbar notification
application If you use the telephone dialer application from several locations
(e.g. from a laptop computer) this powertoy is a must Double-click the TapiTNA
icon or place a shortcut to it in your Start menu An icon will appear in your
Taskbar notification area (near the clock A menu from this icon enables you
quick access to change your current TAPI location bring up dialing properties
run Phone Dialer TweakUI TweakUI is the handy Control Panel for "Type
A" personalities. With TweakUI, you can change menu speed mouse
sensitivity window animation and sound shortcut appearance and default names
which icons appear on your desktop create new templates boot parameters
including whether or not to start the graphic user interface and there`s more
Please give it a try FAST FOLDER CONTENTS With this handy-dandy context-menu
extension, when you right-click on any folder or other container, you`ll get a
cascade menu that shows you all the contents of that folder, one-level deep. It
works on shortcuts-to-folders, too PENDING CHANGES/FIXES: None FLEXI CD FlexiCD
is a taskbar notification icon that makes controlling audio CDs a breeze. When
an audio CD is in your drive, FlexiCD gives you convenient single-click
play/pause control, a tooltip that tells you which track and time you`re on,
and a right-click menu that provides commands for starting, stopping, ejecting
and moving around the tracks on your CD CABFILE VIEWER You know those *.CAB
files that you`ll find on the Win95 CD and floppies? (These are files
containing one or more compressed files.) Well, with the CABFILE Viewer shell
extension, you can browse right into a CAB file and see all of its contents,
and perform normal shell operations on the files inside DESKMENU Get to the
contents of your desktop from a convenient menu without moving a single window
This utility appears in your taskbar near the clock and looks like your desktop
icon. Click it for quick access to all of your desktop contents via a
convenient menu. Deskmenu also allows you to minimize and unminimize all of
your windows ROUND CLOCK This version of CLOCK.EXE takes advantage of win95`s
region windows, so your analog clock will be round, just like a real clock
would. To see it in action, run Clock, then choose "Analog" and
"No Title". (Note.. you just need to copy this EXE to use the clock.
No setup file is provided DOS PROMPT HERE 1.0 Right-click a folder and start an
MS-DOS prompt right here, right away. TIP: You can even right-click the tiny
icon in the far upper left hand corner of an open folder EXPLORE FROM HERE This
is a simple custom command for all folders and containers that lets you
right-click and choose "Explore from Here" to get an Explorer window
that has the target folder as its root SHORTCUT TARGET MENU Finally, you can
get the properties for a shortcut`s target just by right-clicking the shortcut.
This extension will add to any shortcut`s context menu the complete context
menu of its target XMOUSE For all of the CS majors in the audience-- make the
focus follow the mouse without clicking, a la X Windows. TIP: To turn it off,
use the control panel QUICKRES Here`s one we wish was built right in: change
DPI and bit depth without rebooting. QuickRes lives in the notification area--
just single-click (right OR left) on it to select your new display settings.
Does not have an expiration date, but only runs on Windows 95 SEND TO X Adds
the following new commands to your "Send To" menu Send To Any Folder
Send To Clipboard as Contents Send To Clipboard as Name Send To Command Line
FIND X Lets you add your own custom commands to the "Find" menu.
Comes with a few built-in to get you started Find On the Internet (requires
Microsoft Internet Explorer 3.0 Find In the Knowledge Base -- help yourself to
Microsoft`s own online database of troubleshooting tips Find Address (requires
Microsoft Exchange Find Email Message (requires Microsoft Exchange Installing
the PowerToys 1.Create a folder for the PowerToys: Right-click on the desktop
and choose New:Folder from the pop-up menu. Name the folder "Power
2.Download the PowerToys: Click the link on the PowerToy page to download the
file "PowerToy.exe". Save it in the Power folder you just created
3.De-compress the file "PowerToy.exe": Open the Power folder and
double-click the file "PowerToy.EXE". This will create several new
files in your Power folder 4.Install the PowerToys: Find the new file called
"Install". Right-click it, then choose Install Uninstalling the PowerToys
1.Open the control panel: On the Start Menu, choose Settings->Control Panel
2.Open "Add/Remove Programs": Find the Control Panel called
Add/Remove Programs and double-click it 3.Remove PowerToys: Select the PowerToy
you want to uninstall on the list, then click the button marked
"Add/Remove
Program
Location:
Programs\POWERTOY\POWERTOY.EXE
MUTILATE
v2.20 File Wiper/Free Space Wiper
MUTILATE
v2.20 File Wiper/Free Space Wiper Destroys sensitive files beyond any hope of
recovery. Wipes free space on any drive. Normal file deletion does not really
remove sensitive files from your hard drive. They can be easily undeleted with
the right tools Make sure your deleted files are gone forever with Mutilate
Program
Location:
Programs\MUTIL220\SETUP.EXE
VECTORS
CHECKER V1.1
Detects
a "Lurking" Program or Sloppy "Un-Install" by Checking the
Interrupt Vectors and Start of Free Memory. "Un-Install" refers to
TSR Programs. It Reports All Vectors that have Changed, plus a Brief
Description of the Vector`s Function. It also Reports if the Start of Free
Memory has Changed, and Displays the Reference Address and the Current Address
for comparison
Program
Location:
Programs\VECSCK\VC.EXE
VerDisk
1.1
VerDisk
1.1, Check floppy disks for errors, Win 3.1
Program
Location:
Programs\VERDSK11\VERDISK.EXE
Windows
95 Care Package
Use
the Microsoft Windows 95 Care Package to help you resolve problems with setting
up and running Windows 95
Program
Location:
Programs\CARECK\TROUBLES.EXE
WinLight
1.8
WinLight
1.8
Program
Location:
Programs\WLGHT18\WLGHT18.EXE
WinMiser
Pro
WinMiser
Pro
Program
Location:
Programs\WMISRP\WINMISER.EXE
WorkStation
Lock
WorkStation
Lock, Version 2.2, 1997 WorkStation Lock provides a simple and inexpensive, but
effective way to password protect your system at startup or quickly from a
desktop shortcut without involving a screen saver. It is easy to configure and
requires no modifications to your current system configuration. Administrator
functions are enabled for site licenses
Program
Location:
Programs\WRKLCK22\WRKLOCK.EXE
Y2K
- Millennium fix for IBM PC
Y2K
- Millennium fix for IBM PC This program is a workaround for a 2000AD clock
problem in many desktop PC`s. The effect of the clock setting itself to 4/1/80
or 1/1/94 after the first post-millennium reset is caused by the `century byte`
in the BIOS which requires a change to be made from the operating system When
installed, the program should make the transition to the next millennium
unnoticable
Program
Location:
Programs\Y2K\Y2K.EXE
Con97M
Con97M
Program
Location:
Programs\CON97M\SETUP.EXE
Dunce
v2.52
Dunce
v2.52 Dial-Up Networking Connection Enhancement. Adds features to your DUN
connections such as bypassing Connect To Auto Reconnect, Automated Connections,
and Run Items
Program
Location:
Programs\DUNCE252\DUNCE.EXE
Program
Protector Demo
Place
"Protect.exe" infront of the command line of any Windows 95 shortcut
or Windows NT program manager shortcut When you run the program, a password
dialog will be displayed. Enter the password above, and the program will run
Program
Location:
Programs\PPDEMO\PPDEMO.EXE
REDHAND
- SECURITY TRACKING
RedHand
can place no restrictions on what the user does, but tell you exactly what
someone did on your computer while you were away, exactly when they did it, and
how long it took, and they won`t even know they were being watched
Additionally, windows can be discretely "locked" to prevent access,
RedHand will simply close them immediately or send an error message of your
choice You can control exactly which areas of your computer that you do not
want others to have access to You start RedHand by double clicking its icon in
program manager On startup, RedHand minimises, runs as an innocent looking icon
(there is a choice of fifteen) and begins recording. Once running, RedHand can
only be stopped with a password and will continue to record the title of every
window used, and stores them away in its data file It`s name does not appear in
the windows "Task List", and therefore cannot be switched off by any
program that I know of You (with the password) can then view or print all
activity on your computer up to the present time. Once the valid password has
been entered you can, of course, stop the recording or end the program Note:
The RedHand icon resides on the desktop behind all other windows, so to get at
it you will need to minimise everything else that is running, as RedHand cannot
be "Switched to.." from the task list. (`Cos it ain`t there You can
monitor your computer even if it is switched off when you leave it, Just move the
RedHand icon (or whichever icon you choose) into your "Startup"
Group, and the program will run as soon as windows starts The StartUp group can
be locked to prevent the icon being moved out The only giveaway that something
may be going on is the rattle of the hard disk every time a window changes, as
RedHand writes the Log. This is unavoidable, if RedHand stored its Log in
volatile memory for any period of time before writing to disc, then the last
entries in the log could be lost if the user just turns the power off The last
entries are likely to be the most important if he/she is copying something to
disc, as soon as the operation is complete he/she will just hit the on/off
switch and go As RedHand writes to the hard disc once a second this possibility
is virtually eliminated In any case, the hard disc often reads and writes when
windows change, and the casual user is unlikely to notice
Program
Location:
Programs\REDH22\REDHAND.EXE
SafetyScan
SafetyScan
- Win95 error prevention software
Program
Location:
Programs\SAFESC\SAFETYSC.EXE
SciTech
Display Doctor 5.3a
SciTech
Display Doctor is a collection of useful utilities that fix many common
problems associated with Super VGA (SVGA) graphics cards. SciTech Display
Doctor contains a number of separate components that make up the entire
package. You may already be familiar with UniVBE, the Universal VESA BIOS
Extension. UniVBE is now one of the many components that make up the entire
SciTech Display Doctor suite of utilities SciTech Display Doctor updates your
graphics card to the latest standards so you can be sure programs will work
correctly and will run as fast as possible on your system. Many popular games
like The 11th Hour, Quake and Duke Nukem 3D rely on the latest VESA graphics
standards in order to obtain the highest performance possible
Program
Location:
Programs\DISDOC\SDD53A.EXE
TempDump
TempDump
is a program you can launch under Win3.x/Win95 that will de-attrib and delete
every file and subdirectory from up to 20 directories that you specify in its
.INI file THE POINT To quickly rid your specified temp areas of all files,
whether you put them there for temp usage, or Win apps created them and forgot
to clean them up
Program
Location:
Programs\TEMPDUMP\TEMPDUMP.EXE
The
Lock 98
The
Lock version 4.98.191 Password Security system for Windows 95 workstations
Program
Location:
Programs\LOCK-98\INSTALL.EXE
WINOK
- The Advanced PC Software Manager
Standalone
Version) for Individual Apps (Solves Software Problem Easily Dynamically
Monitors, Checks and Corrects DLLs loaded, INI & Registry Entries used
Network Version) Simple and Effective Management of Network PCs Installs &
Maintains Applications and Menus Centrally Reducing the "Total Cost of
Ownership" "TCO
Program
Location:
Programs\WINOKV10\SETUP.EXE
Check
Sum Calculator
The
program calculates a full checksum and a EPROM Standard Check Sum for a
user-selected file The Full Check Sum is simply the sum of the Ordinal values
of all bytes in a particular file. This checksum is displayed in Hexadecimal
The Eprom Standard Check Sum is simply the last 4 characters of the Full Check
Sum. This is consistent with the Check Sums calculated by EPROM programmers /
readers This Check Sum Calculator is useful for calculating checksums for
various files, to ensure copying / transmission occurs correctly calculating,
comparing, and checking checksums for Arcade Game ROMs and the ROMS and EPROMS
in various computer equipment
Program
Location:
Programs\CHECKSUM\CHECKSUM.EXE
NO GAMES
AT WORK
NO
GAMES AT WORK Have you ever considered how many employee working hours are
wasted playing PC games? What about network performance degradation and wasted
disk space? YOU could achieve substantial savings if you COULD REMOVE GAMES
FROM YOUR NETWORK. AntiGame can search detect and optionally delete games from
your network server`s disk or from individual disks (C drives). The shareware
version can detect 100 different games under Windows Windows 95, Windows NT,
OS/2 and DOS The registered version can detect 6545 games
Program
Location:
Programs\ANGAME31\ANTIGAMW.EXE
Oil
Change by CyberMedia
Oil
Change by CyberMedia - Program Update via WEB
Program
Location:
Programs\OCSETUP\OCSETUP.EXE
CDROM
CHEATER v2.1r
CDROM
CHEATER v2.1r - emulates CD drives on HDD to run CD programs faster and better
Great with games
Program
Location:
Programs\CDRCHT\CDCR.EXE
File-Ex
v2.1/Win3.1
File-Ex
v2.1/Win3.1 - File Dialog Extensions Makes Windows file open/save dialogs
better Adds file Find, Copy, Delete, Rename, Move and MakeDir functions to all
applications Open and Save dialogs, plus easily access the last 25 files and
directories used, and 100 favorites used in any application Also enlarges
dialogs to any size Fully functional shareware evaluation copy By Cottonwood
Software <ASP> <STAR> <ESC
Program
Location:
Programs\FILX210A\FILEEX.EXE
ESUPPORT
Tech
support from 1,000 hardware and software companies
Program
Location:
Programs\ESUPPORT\ESUPPORT.EXE
Troubleshooting
GP Faults (UAEs) FAQ
Troubleshooting
GP Faults (UAEs) FAQ
Program
Location:
Programs\WW0524\WW0524.EXE
Windows
95 Switches for Troubleshooting GPF Errors
Windows
95 Command Switches for Troubleshooting GPF Errors
Program
Location:
Programs\135335\TROUBLES.EXE
DirectX
6.0 (98)
This
is the long awaited re-release of Microsoft's DirectX extensions. This will
upgrade existing or create new installations of DirectX. The installation
offers full version checking. DirectX is an add-on to enhance your system's
hardware/software interaction. It will increase sound and video performance,
along with offering hardware acceleration when available!
Program
Location:
Programs\support\directx\dx6core.exe
DirectX
6.0 (95)
This
is the long awaited re-release of Microsoft's DirectX extensions. This will
upgrade existing or create new installations of DirectX. The installation
offers full version checking. DirectX is an add-on to enhance your system's
hardware/software interaction. It will increase sound and video performance,
along with offering hardware acceleration when available!
Program
Location:
Programs\support\directx95\dx6eng.exe
Visual
Basic Runtimes 5.0 (95/98/NT)
The
runtime files for visual basic 5.0 For programs made in visual basic 5.0.
Program
Location:
Programs\support\vb5\msvbvm50.exe
Visual
Basic Runtimes 4.0 (95/98/NT)
These
are the runtime libraries for Visual Basic 4.0 applications. Download this file
if a program you are using says it requires the Visual Basic 4.0 Runtimes, or
VBRUN400.DLL.
Program
Location:
Programs\support\vb4\vb40032.EXE
Visual
Basic Runtimes 3.0 (95/98/NT)
These
are the runtime libraries for Visual Basic 3.0 applications. Download this file
if a program you are using says it requires the Visual Basic 3.0 Runtimes, or
VBRUN300.DLL.
Program
Location:
Programs\support\vb3\vbrun300.exe
MFC
DLLs 4.2b (95/98/NT)
Download
this file if an application you are using asks for the Microsoft Visual C++ MFC
DLLs 4.2 or earlier. This download includes the following files: MFC42.DLL,
OLEPRO32.DLL, and MSVCRT.DLL. If you
have a browser that is capable of installing CAB files (such as Microsoft
Internet Explorer), then the files should install automatically. Otherwise, you
will need a CAB file viewer, such as the one included in the MS Power Toys.
Program
Location:
Programs\support\mfc\mfc42.cab